Yes it does, the micro SD is OK, for instance with Greece_AnaDigit_v635.img
I've tested with draw order 31 and 6 and 1 and 0, nothing shown up
Printable View
Yes it does, the micro SD is OK, for instance with Greece_AnaDigit_v635.img
I've tested with draw order 31 and 6 and 1 and 0, nothing shown up
I don't know if this really can help but a full guide about Oregon 6xx Custom Maps is here:
It might seems stupid but have you consider doing a device Reset or a Master Reset especially if nothing else works ?Code:https://garminoregon6xx.wikispaces.com/Custom+Maps
Thks Ellinas, I'll see your link.
Yes I have done a reset of the settings to the original ones, and removing the batteries too. A Master reset, I fear to not know what it is, How can I do it ? Isn't it dangerous ?
It seems I'm not the first to have the same problem. ReadBut I don't find any answer to the trick in this thread .Code:http://garminoregon6xx.wikispaces.com/share/view/66781896
:(
Is it perhaps just Anavasi kmz maps that are causing the problems, or is it something else?
Does your Oregon read any other kmz maps from its SD card? ?
(If you haven't got any other kmz maps, you can make a small one for testing eg with Mapc2Mapc (free trial, then £15 to buy).
Is your path to SD/Garmin/CustomMaps free from typing errors? (On my Oregon 450 the upper/lower case doesn't matter, but the exact lettering is crucial).
Since you started reading around wikispaces for Oregon 6xx here is how to do a Master Reset:
I don't think that's your problem though, wouldn't be supriced if there's a compatibility issue with Anavasi's kmz and your Oregon. Have you tried to create a custom map of your own following the guide from link above to see if it works OK ?Code:http://garminoregon6xx.wikispaces.com/Diagnostic
Hy, I've done a master reset. I have cancelled everything on the microSD, then I have loaded another kmz map thru BC (only 36 tiles of 1mo ). Nothing more with it, no map shown up. I fear that my Oregon is definitly reluctant to any kmz maps.
Great deal now I cannot save anything.
Quite recently, after the hard reset maybe :
I can't save a WP ---> message error [Track archiv error]
I can't save a track ---> message error [Database error]
And the Garmin support staff is nowhere, totally deaf and dump, anyone can help ?
If O600 was mine I'd try:
Make another hard reset then flash an older firmware then reset again and then reflash the latest firmware and reset.
PS: back up personal files first and delete them from unit before flashing
thks Caty
my oregon directory is this (see pict) does a file missing ?
[Only registered and activated users can see links. Click Here To Register...]
[Only registered and activated users can see links. Click Here To Register...]