GMAP3D for version 2012.20 in 3790 series

Quote:

---

Originally Posted by Kanopus [Only registered and activated users can see links. Click Here To Register...]

But looks like you still have a problem ;)

---

Thanks for the suggestions. Yep I do have a problem, no 3D buildings.

I know paths are important, but if mine were wrong...
1st they would not show in the settings/myMaps and
2nd if I re-install City Navigator Europe NTU (Unicode) 2012.10 with the corresponding JCV files and gMap3d files using exactly the same paths everything works.

Quote:

---

Originally Posted by Kanopus [Only registered and activated users can see links. Click Here To Register...]

For SD card setup you are using different 3D map than recommended in post 4. Follow catymag instructions first, than try your modifications.

---

I am not sure I understand what you mean. I am using the gMap3D posted by catymag here...

[Only registered and activated users can see links. Click Here To Register...]

unless you are suggesting to change the file name or use the gMap3D NT instead of the gMap NTU.

.

May you post a screen of your folders in 3790 and their non working files inside ?
It could be easier to discover why they're not working
about this:

Quote:

---

1st they would not show in the settings/myMaps

---

wrong : when i tested Sing/May sw 3D map was showing up in my Maps list but I couldnt see 3D buildings in my CNE map coz that fw didnt support NTU 3D buildings map

Quote:

---

Originally Posted by catymag [Only registered and activated users can see links. Click Here To Register...]

wrong : when i tested Sing/May sw 3D map was showing up in my Maps list but I couldnt see 3D buildings in my CNE map coz that fw didnt support NTU 3D buildings map

---

Thanks for the confirmation. I did not know that.

Quote:

---

Originally Posted by catymag [Only registered and activated users can see links. Click Here To Register...]

May you post a screen of your folders in 3790 and their non working files inside ? It could be easier to discover why they're not working about this:

---

I am happy to post some screenshots, but I am not sure which ones you mean.

Do you mean a screenshot of my Garmin..system folder taken from my PC or do you mean folders on the unit itself.
If it is on the unit I have never seen any access to the folders except holding down the "Top Right hand corner" which gives you access to the flash drive info etc.

Thanks.

Quote:

---

Originally Posted by AS3 [Only registered and activated users can see links. Click Here To Register...]

I am not sure I understand what you mean. I am using the gMap3D posted by catymag here...

---

Looking at your screen shot I see that you have NTU version whereas catymag explicitly wrote about 3D NT on SD.
I don't have 3790, can't check myself.

like this one and from sd too
[Only registered and activated users can see links. Click Here To Register...]

Error will update in a bit..

OK...

New files on the SD card
Old files on in the system folder.

System Folder
[Only registered and activated users can see links. Click Here To Register...]

SD/Map/CNENTU.img and SD/Map/gmap3d.img
[Only registered and activated users can see links. Click Here To Register...]

SD/Garmin/JCV/xxxxx.jcv
[Only registered and activated users can see links. Click Here To Register...]


Deleting these old files from the Garmin system folder makes no difference the gmap3d still does not show in the map view...........

gmapprom.img
gmapprom.sum
gmapprom.unl
gmapprom.gma
GMAP3D.IMG
gmap3d.sum



I have also tried changing the gmap3D.img to CNENTU3D.img in the sd/map folder, but no joy

First :
full CNE NTU 2012. 20 is 2,28 GB (2.456.748.032 byte)

Code:

---

length 2456748032
Header:          20.07.2011 22:49:19, DSKIMG, XOR 00, V 20.12, Ms 0
Mapset:          CN Europe NTU 2012.20 ALL

---

[Only registered and activated users can see links. Click Here To Register...]


and NTU gmap3D.img is 389 MB (408.911.872 byte)

Code:

---

gmap3d.img, length 408911872
Header:          29.06.2011 17:08:22, DSKIMG, XOR 00, V 20.12, Ms 0
Mapset:          CN Europe NTU 2012.20 3D

---

[Only registered and activated users can see links. Click Here To Register...]

May be something wrong in your files ? check them with Gmaptool.

Second : if you have also the old CNE map and the old 3Dmap along the new maps ,Nuvi wont show up any map properly .

Third: if your maps have been downloaded "regular" keep naturally .gma and .unl files, but if you downloaded them from Noeman, backup them on pc and delete them after copying the new files on Nuvi. They'r old maps related and will interfere with new ones showing up on Nuvi- But I think you already did it -

Thanks.

I shall check the files..

OK.

I decided to start again to make sure there were no errors.

I re-downloaded City Navigator Europe NTU (Unicode) 2012.20 + gmap3d + JCV from catymag....

[Only registered and activated users can see links. Click Here To Register...]


I deleted all the old maps from the 3790T/system/folder
[Only registered and activated users can see links. Click Here To Register...]

I installed the 2012.20 map + GMAP3D + JCV to the SD card.
[Only registered and activated users can see links. Click Here To Register...] . [Only registered and activated users can see links. Click Here To Register...]


The gmap3d still does not show the buildings.

To check it was not the card I put the files from the SD card into the Garmin/system folder. Still no joy.

.

Do you unlock gmap3d.img?
Try hard reset of nuvi,but before make backup of folder gpx.