I touch right down of the screen for reset but it's not work.(it's not response) ^_^''
Please help me , My Garmin 1300 US , I update by GUPDATE.GCD
4.6US => 3.0 US => 3.0TH (It Work.)
but 3.0 TH => 4.9 US firrmware , Garmin 1300 can't boot (static at GARMIN Display)
and I plug USB from garmin 1300 to My computer, can't find USB Drive of Garmin (Oh!! My god).
Please Help Me.
I touch right down of the screen for reset but it's not work.(it's not response) ^_^''
How did you update?
Did you use RGN Tool?
Beside, i think this is the wrong area for your question, here normally only maps are discussed.
I am sorry, I didn't use the RGN Tool. I used drag&drop GUPDATE.gcd to .system folder & turn off trun on my garmin with installed.
Then u have a problem. Beside that I am surprised that this worked, u maybe converted your device complete to SG/MAL device.
Dear K.tom
My garmin is not response. Do u have solution for detect usb drive on computer.
Please advice me , thx u very very much. ^_^''
I have converted 1490T US to 1460 TH and it worked, but i have still a problem about the local setting.
It does not show thai for selecting the current local and also thai map (thai language version) does not show any thai word.
However, I can use thai map eng version and there is no any problem with it.
Could someone please help advice me how to resolve the problems.
I have converted 1490T by using the original boot.bin from 1490 US v5.0 + fw_all and fw1_all from 1460TH v3.0 (change HWID from 1133 to 972).
Thank you very much.
My Step Pre boot mode
Step1
1. Power on the unit.
2. Touch upper left of screen , result : the unit is not response. ^_^''
Step2
1. Power off the unit
2. Touch upper left of screen with plug USB cable. , result : the unit is not response. ^_^''
Step1 & Step2 don't find the usb device.
Do u have advice to me , I don't know to resolve the problem.
Please help me.
Bookmarks