FINALLY they admit the reason for this:-
The update which covers the fix for the GPS roll-over was included in a firmware released last year....
[Only registered and activated users can see links. ] :-
VERSION 9.541
Released on 19 December 2018 This update applies to: XXL Classic, ONE IQ Routes, XL IQ Routes, XL IQR2 / XL Classic, GO 750, GO 750 LIVE, GO 950, GO 950 LIVE, GO 540 LIVE, GO 740 LIVE, GO 940 LIVE, GO 530, GO 630, GO 730, GO 930, GO 720, GO 520, GO 920, EASE, ONE 140, Start
Maintenance release.
...so remember if you do take this TTHome mandatory update you'll need to patch this (as all previous navcore versions) to be able to run pirate maps etc!
Direct links:-
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
Last edited by biggerdave; 23rd December 2018 at 06:07 PM.
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
FINALLY they admit the reason for this:-
The update which covers the fix for the GPS roll-over was included in a firmware released last year....
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
What's the difference between LE.cab and GO.cab?
Logically, the GO version is for all those device called GO... & the LE is for the rest:-
This update applies to: XXL Classic, ONE IQ Routes, XL IQ Routes, XL IQR2 / XL Classic, GO 750, GO 750 LIVE, GO 950, GO 950 LIVE, GO 540 LIVE, GO 740 LIVE, GO 940 LIVE, GO 530, GO 630, GO 730, GO 930, GO 720, GO 520, GO 920, EASE, ONE 140, Start
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
Dutch
De oplossing voor de TomTom Truck met behulp van de officiële of gewijzigde 9.702-navcore is heel eenvoudig:
vervang gewoon een enkel bestand (de "glgps" in de map "bin").
Het bestand \ bin \ glgps van 9.702 moet worden vervangen door dat van 9.541.
Alles werkt dan normaal op GO x20, x30, x40 en x50.
Ik heb met succes getest op de volgende modellen:
GO 920, GO 630, GO 730, GO 930, GO 540, GO 940, GO 750, GO 950 en GO 9000.
Ik heb geen testeenheid om te testen.
N. B. Dezelfde wijziging werkt ook voor navcores 9.510 en 9.401 (ik heb het geprobeerd).
Het is interessant voor de Fransen, omdat de 9.401 de laatste navcore is vóór 9.510, die altijd de
exacte positie van de radars in Frankrijk aangeeft na de wet van 5 januari 2012 die het verbiedt.
English
The solution for the TomTom Truck using the official or modified 9.702 navcore is very simple:
just replace a single file (the "glgps" in the "bin" folder).
It is necessary to replace the file \bin \glgps of 9.702 by that of 9.541.
Everything then works normally on GO x20, x30, x40 and x50.
I have successfully tested on the following models:
GO 920, GO 630, GO 730, GO 930, GO 540, GO 940, GO 750, GO 950 and GO 9000.
I do not have a One to test.
N. B. The same modification also works for navcores 9.510 and 9.401 (I tried).
It is interesting for the French, because the 9.401 is the last navcore before 9.510 which always indicates
the exact position of the radars in France after the law of January 5th, 2012 which forbids it.
Note:
It work for sure with many other Navcore's and devices too
All credits to Charlie62
Last edited by pe1agp; 13th April 2019 at 06:43 AM.
TomTom GO 910 - Navcore 9.510 Bootloader 5.5128 Hitachi HDD replaced by SDHC 32GB Class 10
TomTom Rider v2 - Navcore 9.500 v5 Menu Bootloader 5.5128 32MB available 5.1MB BeNeLux
TomTom One N14644 Canada 310 - Navcore 9.510 Bootloader 5.5011
TomTom on PDA iPAQ 2210 - HAiCOM HI-305III GPS Receiver PCMCIA - Navcore 7.450 Still running some latest maps.
TomTom on iPhone 4 map Benelux
It works on Go710 ? (bootloader 5.5244)
And how to install it please.
I'm a newbie.
Thanks
Not working on Go 710
Freeze on startup every time
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
How to install it? It's a .dlc
Bookmarks