Post here please your help request regarding Garmin

**kRypt0n** · 31st March 2011, 09:06 PM

Hi,
I have a problem with Garmin Mobile XT v50.00.50 (also tried v50.00.60) on Nokia C7-00 (Symbian^3). Garmin can only see the basemap. No matter where I install Garmin and where I place the maps, it doesn't see them. If I remove the basemap, Garmin says "no maps". Maps work fine on Nokia 5800XM (Symbian S60v5).

**catymag** · 31st March 2011, 09:12 PM

read on tutorials how to rename detailed maps in phones and remember phones cant see maps greater than 2 gb

**trumpsta** · 1st April 2011, 01:27 AM

I am running a custom 6.5 ROM. Your direction was right on, worked perfectly. I would like to have some waterways maps of my area also. I would like to try: Inland Lakes 2010 v6.00 and Vision g2 VUS515L v11.50. Would these work with the XT 5.00.20w I am running, and could I use the gmapsup2.img and gmapsup3.img directions I have seen on this site?

**catymag** · 1st April 2011, 02:27 AM

There are certain elements of these mapping products that were designed for use on dedicated GPS products that will not be displayed on a phone.
Read here
[Only registered and activated users can see links. ]
For maps names on MobileXT read
[Only registered and activated users can see links. ]

**chakmool** · 1st April 2011, 03:30 AM

Ooops... I'm getting blank screen after firmware update. Nuvi 265WT HWID 827 here. Instead of booting into Garmin logo, it will display blank screen. Web Updater will still detect it and PC as well. Any advises??

jkalocsa · 1st April 2011, 07:59 AM

hi catymag i need to download the AMAp Fly 5.0
but i can't find ...

Thank you in advance

**catymag** · 1st April 2011, 02:13 PM

Originally Posted by chakmool

Ooops... I'm getting blank screen after firmware update. Nuvi 265WT HWID 827 here. Instead of booting into Garmin logo, it will display blank screen. Web Updater will still detect it and PC as well. Any advises??

you need a service firmware and load it in preboot mode.
look here
[Only registered and activated users can see links. ]
probably you can find it already done [Only registered and activated users can see links. ]
but be careful use the one for your HWID.
If you need more info post here
[Only registered and activated users can see links. ]

**chakmool** · 2nd April 2011, 08:20 PM

Thanks Catymag.
Made Cure file per post putting my HWID 0827 to make the .rgn file, changed all file extensions using XVI32 ok. When it comes to put Nuvi into Preboot mode, it will show white/blank screen no matter how long I have the slider at on position. PC will detect the Gamin folder on the device, I can delete, move files no problem, but the Updater won't pick up the device no matter what I do. Nuvi will stay on white/blank screen all the time since I slide the power slider.

Blank screen will beep as soon as my finger touch it if not connected to PC. Will not respond at all if connected via USB.

Any suggestions??

**catymag** · 2nd April 2011, 11:40 PM

Try this procedure
Drag the RGN up the updater.exe. (This should open the program). At this point select USB "device." (Do not plug the GPS into your computer)

Place the GPS in pre-boot mode:
Turn on the GPS and after put your finger on the battery icon to enter the diagnostic mode. Then click Exit.
When you restart the gps, put your finger on the top left corner.
Once the word appears written system in green above the logo of Garmin, connect the USB cable to your computer. Your device should appear in the list of Devices. (Connect system disappear before the word)
Once listed, click OK.
After giving the OK on the Updater, wait until the end of its work, when it will reset itself and will give the message of success in the program. Dont disconnect the unit or you'll kill it.