Reply With QuoteJust copy the gmap3d.img to your Garmin device, then u should be fine
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Likes: 0
Results 1 to 6 of 6
-
29th November 2010, 08:55 AM #1tkyauGuest
My NUVI 3790T 3d building missing
Hello Bro,
Need help. After i upgraded the software malsing .40 i found out that my 3d building is missing. I check on the map there is something to tick to enable the 3d building is missing also. Can anyone help?
-
29th November 2010, 09:08 AM #2Navigation software expert
- Join Date
- Apr 2009
- Location
- APAC
- Posts
- 1,000
- Rep Power
- 527
-
29th November 2010, 10:15 AM #3aekhongGuest
Try to do H/R.
You said Sg/My firmware V2.40 ???
-
29th November 2010, 10:24 AM #4Member
- Join Date
- Apr 2009
- Location
- ipoh
- Posts
- 11
- Rep Power
- 0
kindly it's not firmware but the malsing nt 2010.40
-
29th November 2010, 10:26 AM #5Member +
- Join Date
- Nov 2010
- Location
- China
- Posts
- 42
- Rep Power
- 26
When I connect to the Garmin Web it also said that there is firmware update which is 2.5. When I click on the update until finished. There is nothing changes even HR.
I check on the .system and the GUPDATE.GCD also show 2.5.
The update is : nuvi37xx_regionfileonly__250.gcd
-
29th November 2010, 01:32 PM #6aekhongGuest
Tzidogang .,
Your problem need pre-boot mode to flash rgn
-connect 37xx to computer
-at comp., drag cure rgn to updater.exe
-at 37xx., press yr finger above "G" of "GARMIN"
-you will see updater will detect your 37xx
-press ok at updater.exe
try it !!
yr 37xx will boot up if cure rgn works .
Delete .gcd in .system and flash back with yr original f/w.
If not works ., may be have to use other way to recover cuase of your missing firmware flashing.Last edited by aekhong; 29th November 2010 at 01:36 PM.
Bookmarks