There is nothing wrong with the sidelist..
For next turn
...
If you look for inside your menu ...
You will change your icons!
There is something wrong with the Side List
Cannot disable the Sidelist Look. Save folder deleted.
Edit:
Ok, I get it, you changed half of the settings again.
Next turn Icons in Classic look are much better (That should be a compliment)
Last edited by Golom; 22nd June 2024 at 12:09 PM.
There is nothing wrong with the sidelist..
For next turn
...
If you look for inside your menu ...
You will change your icons!
Last edited by frontzosd; 22nd June 2024 at 11:45 AM.
@frontzosd
I have one more request.
It concerns the translation. e.g. "Map Ungle Portrait" etc.
Is there a way to separate the text and the slider?
Otherwise I have to translate 50 lines
@AnthonyGreek
Thanks, but it's not just because of work.
My dictionary.lang is already 3 kilometers long anyway
Last edited by Golom; 22nd June 2024 at 05:26 PM.
@Frontzosd
1. As I can see, it was not possible to solve the problem of the current speed disappearing, only if 0 km/h is visible at the stop, which in your opinion was not a good solution? But maybe it just bothers me! If it's just a problem for me and there's no other solution, I'll put it back in FD_Silver.zip for myself. ✅
2. The other is the (already mentioned) disappearance of traffic signs at a stop, which is also quite confusing, is there no solution for that either? It is interesting that the traffic signs prohibiting turning never disappear. Couldn't this be the solution for the other traffic signs?
If these two could be solved, I think the driving screen would be fine.
In portrait mode, the current speed background is wide again, is it back for a reason or just by chance? Using file #176 made it good! ✅
With the new menus (Sidelist Look, Cursor Height), the phone's back button does not work, only the button on the screen. ❌
Even when using file #176, the traffic signs disappear, and the current speed, as before, is unchanged. ✅
#176 fixed the current speed background width in portrait mode, but several anomalies appeared with traffic signs! All this after deleting the Save folder, without rotating the display at the stop I mentioned!
Spoiler: Screenshot
Last edited by Papp G; 14th September 2024 at 09:03 AM.
I created a new feature, with which we can turn off the sound on each driver alert signal separately.
So we have a new menu...
As you can see from the photo...
The idea comes from our friend AntonyGreek
And the code from me!
For each change to our menu,
We press the restart button, for to save our
New settings
PappG
with pedestrian moving, the driver alert signals don't work...
unless the system detects such as car movement,
it's written in the code...(factory code).
I change it with last update....#177. Post!
This...post!!!
I Think, you are the only one, have the problem
with speed..
Also I hope , your tests, done with car and not
With pedestrian navigation....!
It's clear gps operation ...
Also...
I hope you have delete your save folder,
With the last updates...
We don't forget to do ,sometimes.
For speedlimit box...
You ask if the problem, fixed alone or by code.
......Alone, I don't think...
Simply
I had forgotten to pass the update
Spoiler: link
Spoiler: screenshots
Last edited by frontzosd; 25th June 2024 at 02:35 PM.
Driver Alerts , with three choices
"Disabled"
"Visual and Audio"
"Only Visual".
Spoiler: link
Spoiler: screenshots
Important!!
Don't wait functions which we have in older Next apks, worked and in theese new 64 bit apks.
The most simple things are difficult to work here.
You ask things .... and you wait to have it..
I'm alone in this "street"...
My code is from the beginning...
And...
Except from code...
I must found solutions in every obstacle!!
Last edited by frontzosd; 26th June 2024 at 10:00 AM.
Speaking of sounds, couldn't there be a button that turns all sounds on/off with one touch and the volumes don't have to be adjusted, or is that in the .apk too? If I set the existing buttons to mute, the navigation continues to speak, voice navigation must also be switched off in the sound menu.
With the last update of driver alert zip ,In some signals, when we give settings we dont have the correct result .
The reason was because we have different size
Of list alert signals for each country.
So the problem was that, when we give
Settings to the list, we must synchronize the
Lists.
The solution.
For example:
All the id,s to the list and with the signals that
Is not supported for the country [disable signals to the list]
So this is the way , to give settings to our
List , with the correct results.
Also the second zip , contains the nice icons
Created from our friend Alain 57.
You can add it , in your ux folder , With the
Main zip
So, the today fix , is a classic example that...
Except from code, the creator must found solutions!
Last edited by frontzosd; 28th June 2024 at 08:57 PM.
Bookmarks