Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 2 of 2
  1. #1
    TomTom SModerator

    QUIN1965's Avatar
    Join Date
    May 2012
    Location
    al lado del mundo
    Age
    50
    Posts
    2,604
    Rep Power
    872

    Guide How to make a RESET or HARD-RESET

    How to make a RESET or HARD-RESET
    by Txanton

    Hi again mates , the goal of this tutorial is to show you where those tiny holes to make the reset in our devices .

    For that we need a clip or some other rigid, hard and fine utensil while that between us in the hole and we will not double .

    Normally when you want to reset it because our device has been locked , which will already be on, but it may be the case that is not blocked and if we is malfunctioning and forum advise us to do a reset or even a Hard -Reset , in which case it will turn our apparatus .

    It is advisable to have charged the battery , but not indispensable.

    Reset: With the clip and the gadget on, we put through the hole until it is restarted , at which point we get the clip.

    Hard- Reset: keeping the power button while our apparatus we introduce the clip into the Reset hole until you reboot , at which point we get the clip and will loose power button.


    Thanks mate Hellboy , which I am extremely grateful for their invaluable help and advice in making this tutorial, we can also see :

    Official version of TomTom Device Reset .

    Go Live 1005, Go 1005, Go Live 1000, Go 1000, Go 950/750/550, Go 940/740/540, XXXL 540 S/530 S, XL LIVE IQ Routes/340 LIVE, XL IQ Routes / 340, XL (30-Series) / 330, One IQ Routes / 140, One (30-Series)/125/130, Rider Pro, Urban Rider, Blue&Me TomTom

    To reset your TomTom device, do the following:
    1. Sure the battery is properly charged.
    Charge your device for at least 2 hours before trying to turn it back on. Make sure the charging device is turned on.
    2. Reset your device.
    Press and hold ON / OFF until the device is turned on. This may take more than fifteen seconds


    Go 930/730/530, Go 920/720/520, Go 910/710/510, Go 300/500/700, ONE XL, One 3rd Edition, One 2rd Edition, One 1rd Edition, GO I90, ECLIPSE II, DAIHATSU, ECLIPSE, TOYOTA

    To reset your TomTom device, do the following:
    1. Sure the battery is properly charged.
    Charge your device for at least 2 hours before trying to turn it back on. Make sure the charging device is turned on.
    2. Remove the SD card.
    If your device uses an SD card, remove it.
    3. Reset your device.
    Use a straightened paper clip or something similar to press the reset button for 15 seconds. See illustrations below to find the reset button.
    4. Turn on the device.
    Hold the button on / off for 5 seconds, at least.
    5. Insert the SD card.
    If your device uses an SD card, insert the SD card.

    I attached some images that you may know I find the reset hole, which will be located at the bottom of our device


    imagen1aj
    imagen2ii
    imagen3ov

    Vía LIVE 120, Vía 110/120/125

    To reset your TomTom device, do the following:
    1. Sure the battery is properly charged.
    Charge your device for at least 2 hours before trying to turn it back on.
    2. Reset your device.
    Press and hold ON / OFF until the device is turned on. This may take more than fifteen seconds.


    XL IQ Routes 2

    To reset your TomTom device, do the following:
    1. Sure the battery is properly charged.
    Charge your device for at least 2 hours before trying to turn it back on. Make sure the charging device is turned on (except for RIDER who has charge indicator).
    2. Reset your device.
    Use a straightened paper clip or something similar to press the reset button for 15 seconds. See illustrations below to find the reset button.
    3. Turn on the device.
    Hold the button on / off for 5 seconds, at least.

    Reset button location

    The reset button is on the bottom of your TomTom device.


    1310xliqr2detail

    Start 2/ EASE, Start
    1. Goal mount the device by pressing the release button on the mount.
    20080250

    2. Remove the back cover of the device by holding the sides and pushing the device through the central area of ​​the housing.
    14641944

    3. To press the reset button, use a straightened paper clip or similar object. The reset button is located at the base of your device.
    85394739

    RIDER 1st Edition, RIDER 2st Edition

    To reset your TomTom device, do the following:
    1. Sure the battery is properly charged.
    Charge your device for at least 2 hours before trying to turn it back on.
    2. Remove the SD card.
    If your device uses an SD card, remove it.
    3. Reset your device.
    Use a straightened paper clip or something similar to press the reset button for 15 seconds. See illustrations below to find the reset button.
    4. Turn on the device.
    Hold the button on / off for 5 seconds, at least.
    5. Insert the SD card.
    If your device uses an SD card, insert the SD card.

    Reset button location

    The reset button is on the bottom of your TomTom device.

    24297420

    Sony XNV Navigation Module
    To restart the navigation module, remove the bracket by pressing the release button. Then press the reset button on the back of the navigation module for at least 10 seconds. Replace the navigation unit in the holder.

    42166985

    Credits Orni

    I hope you have been helpful and suggestions and corrections are accepted.

    I want to clarify that everything I know and share I did not make it, I've taken from different foreros this and other forums and I've done nothing but learn from them and copy them, so I am extremely grateful. Specifically and especially to Hellboy, Charly2007, jenito and peers.
    Last edited by QUIN1965; 17th January 2015 at 22:04.

  2.    Advertissements


  3. #2
    Banned
    Join Date
    Feb 2014
    Location
    earth
    Posts
    1,167
    Rep Power
    0

    Guide How to make a RESET or HARD-RESET

    How to make a RESET or HARD-RESET

    How do I reset my device if it freezes or does not start?
    How to reset your device.



    GO 6000/6100
    GO 5000/5100
    GO 600/610
    GO 500/510
    GO 400
    GO 60
    GO 50
    GO 40
    START 60
    START 50
    START 40
    GO LIVE 800 series
    GO 1000 series
    GO 2505 (USA)
    GO 2405 (USA)
    GO 950/750/550
    GO 940/740/540
    Via series
    XXL 540 S/ 530 S
    XXL IQ Routes / XXL Classic
    XL LIVE IQ Routes / 340 Live
    XL IQ Routes / 340
    XL (30 - Series ) / 330
    Start 20 / 60 Series
    ONE IQ Routes / 140
    ONE ( 30-Series ) / 125 / 130
    RIDER 400, RIDER 40
    RIDER, Rider Pro, Urban Rider
    Blue&Me TomTom 2 series
    Blue&Me TomTom (LIVE)



    Step-by-step instructions

    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again.


    2.Reset your device.
    Press and hold the On/Off button until you hear the drum sounds and the device restarts. This can take 30 seconds or more.


    [Only registered and activated users can see links. ]



    GO 930/730/630/530
    GO 920/720/520



    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


    2.Remove the SD card
    If your device uses an SD card, remove it.


    3.Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


    4.Turn your device on.
    Press the On/off button for at least 5 seconds.


    5.Insert the SD card
    If your device uses an SD card, insert the SD card.



    Where to find the reset button

    The reset button is on the bottom of your TomTom device


    1310gox20
    1310gox20 detail




    GO 910/710/510


    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


    2.Remove the SD card
    If your device uses an SD card, remove it.


    3.Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


    4.Turn your device on.
    Press the On/off button for at least 5 seconds.


    5.Insert the SD card
    If your device uses an SD card, insert the SD card.



    Where to find the reset button

    The reset button is on the bottom of your TomTom device

    1310gox10
    1310gox10 detail



    GO, GO 300/500/700


    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


    2.Remove the SD card
    If your device uses an SD card, remove it.


    3.Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


    4.Turn your device on.
    Press the On/off button for at least 5 seconds.


    5.Insert the SD card
    If your device uses an SD card, insert the SD card.



    Where to find the reset button

    The reset button is on the bottom of your TomTom device

    1310go
    1310go detail


    XL IQ Routes² / XL Clasic



    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


    2.Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


    3.Turn your device on.
    Press the On/off button for at least 5 seconds.

    Where to find the reset button

    The reset button is on the bottom of your TomTom device.

    1310xliqr2
    1310xliqr2 detail


    ONE XL


    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


    2.Remove the SD card
    If your device uses an SD card, remove it.


    3.Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


    4.Turn your device on.
    Press the On/off button for at least 5 seconds.


    5.Insert the SD card
    If your device uses an SD card, insert the SD card.

    Where to find the reset button

    The reset button is on the bottom of your TomTom device.

    2027onexl
    2027onexl detail


    Start2 / Start Classic /EASE
    Start


    [Only registered and activated users can see links. ]


    Step-by-step instructions

    To reset your TomTom device, do the following:
    1.Remove the Mount from the device by pressing the release button on the Mount.

    2027 start 01
    2027 start 02
    2.Pull the back cover off the device by holding either side of the cover and pushing the device through the centre of the cover.2027 start 04
    3.Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. The reset button is on the bottom of your device.2027 start 06


    ONE 3 rd Edition


    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


    2.Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


    3.Turn your device on.
    Press the On/off button for at least 5 seconds.

    Where to find the reset button

    The reset button is on the bottom of your TomTom device.

    2027one3rd
    2027one3rd detail



    ONE 2nd Edition
    ONE 1st Edition



    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


    2.Remove the SD card
    If your device uses an SD card, remove it.


    3.Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


    4.Turn your device on.
    Press the On/off button for at least 5 seconds.


    5.Insert the SD card
    If your device uses an SD card, insert the SD card.


    Where to find the reset button

    The reset button is on the bottom of your TomTom device.

    1310one2
    1310one2 detail


    RIDER 1st Edition, RIDER 2nd Edition

    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again.


    2.Remove the SD card
    If your device uses an SD card, remove it.


    3.Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


    4.Turn your device on.
    Press the On/off button for at least 5 seconds.


    5.Insert the SD card
    If your device uses an SD card, insert the SD card.
    Where to find the reset button

    The reset button is on the bottom of your TomTom device.

    1310rider
    1310rider detail


    Carminat TomTom (LIVE)

    To reset your device, switch off the car engine and then remove the memory card. Re-insert the memory card, wait 30 seconds and switch the car engine on again.


    DAIHATSU,ECLIPSE,TOYOTA


    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


    2.Remove the SD card
    If your device uses an SD card, remove it.


    3.Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


    4.Turn your device on.
    Press the On/off button for at least 5 seconds.


    5.Insert the SD card
    If your device uses an SD card, insert the SD card.

    Where to find the reset button

    The reset button is on the bottom of your TomTom device.


    1310eclipse
    1310eclipse detail



    ECLIPSE II
    GO I90
    Toyota Aygo Connect Multimedia


    To reset your TomTom device, do the following:
    1.Check that the battery is charged properly.
    Charge your device for at least 2 hours before trying to turn it on again. Make sure the charging light on your device is on.


    2.Remove the SD card
    If your device uses an SD card, remove it.


    3.Reset your device.
    Use a straightened paper clip, or something similar, to push the reset button for at least 20 seconds. See the pictures below for where to find the reset button.


    4.Turn your device on.
    Press the On/off button for at least 5 seconds.


    5.Insert the SD card
    If your device uses an SD card, insert the SD card.

    Where to find the reset button

    The reset button is on the bottom of your TomTom device.

    1310eclipse2
    1310eclipse2 detail




    Mazda Navigation System NB1 (LIVE)



    To reset your device, switch off the car engine and then remove the memory card. Re-insert the memory card, wait 30 seconds and switch the car engine on again.

    Sony XNV Navigation Module


    To reset your navigation module, first remove it from the cradle by pressing the release button. Then press the reset button on the back of the navigation module for at least 20 seconds. Push the navigation module back into the cradle.

    1310xvn


    Source
    Code:
    Please Login or Register to see the links

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.