I have downloaded from post #7,
Cannot make voice command working, neither voice address input. I have GO 720
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
Device: Tomtom One 9.702 (TrUCK)
When we set a route it ask what type of vehicle and if we select car it doesn't show anymore again an option to change it back to truck, even on menu settings it doesn't appear "vehicle settings".
I don't have an option to set the type of vehicle like truck and its weights and hights... Think it's a bug!
If you DO want to use the 9.7** navcore (see other posts/reports about errors in this navcore) because you want to run the v910 or later Truck map (which will ONLY run on this navcore) then here are a couple of tweaks summarised below:-
Problem 1: When entering Vehicle height you can't add the . "dot" or ' foot mark eg.
if you want to add 14' 9" high, you can only enter 14' or 15' not between size.
Solution: if you set height at 14' then tap done...
it then goes to vehicle width, tap back...it goes back to vehicle height...
tap the screen anywhere but not on the keypad (this will remove the white box around the 14')
now enter 9 and then done, this will give you vehicle height of 14'9"
the same process can be done with vehicle length/height/width
Problem 2 (ONLY for the x40's): After initial boot up after a hard reset or inserting your truck card when you CAN set your vehicle dimensions, this screen/option is not available again.
Solution(s):
1. Change preferences > Planning preferences > Edit vehicle profile from there
or
2. Set a new destination and when it's all set up the last screen will tell you your vehicle profile where you can change it
Also note, if you select "car/taxi/van/other" profile you lose the option to change vehicle profile again unless you remove SD card/reboot/re-insert etc or do a factory reset THEN you have the option back.
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
But the best navcore Truck for this Tomtom model is still the "9.702 x00, One, One XL (TrUCK)" that you have on post #8, right?
And the updated map "Europe_TRUCK_945_6247" on this model will work ok since we setup truck vehicle and change it no more, right?
Yes, and yes
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
I've deleted all files on the SD card and paste it all over again and still doesn't appear option to select Truck ... Even if i choose a destination it doesn't ask me which vehicle i want to use .... Im confused!!
Please reconfirm:-
a) your device IS a TT One
b) you ARE using the 3rd attachment from my post #8
c) the 9.702 navcore AND the Europe_TRUCK_945_6247 are both on a 4Gb SD card
d) You insert the SD card in BEFORE booting up/switching on the device
e) you've tried resetting the device using a paperclip in the reset hole
f) you do get the Truck picture (splash screen) on first start up
Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttonsS i m p l e s
PS If you find any dead links on MY posts please pm me & I'll try to fix/reload
all afirmative but the last one appears me instead a batman background...
I've tried to download again but the link is off.
Bookmarks