Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1
    TomTom Expert

    biggerdave's Avatar
    Join Date
    Dec 2011
    Location
    Darn sarf
    Posts
    1,769
    Rep Power
    508

    trucks 9.701 Truck navcores

    For the latest 9.702 versions see my post #8 here [Only registered and activated users can see links. ]


    Reposted as previous thread was "lost in migration"


    Here's my current (and the latest) pre-patched 9.701 set attached to run the truck map on other devices

    These are full working dumps of everything you need (not just the .cab files you get from TT.com or below) apart from the Truck map itself.

    Filefactory (dlc's) attached (use Jdownloader) see [Only registered and activated users can see links. ]

    Download your selected attachment from below, extract/unrar/unzip to get the .dlc file then copy to/use Jdownloader to download the actual dump folder. Then just extract/unzip/unrar that downloaded .rar, copy the contents of the extracted folder to a 4Gb SD, MicroSD or SDHC card (minimum class 4 but preferably class 6 or higher) or direct to your internal memory on a 910/920/930/940/950, copy/add your ttgo.bif file from your backup or internal memory, add the new Truck map folder (currently v956) from [Only registered and activated users can see links. ] . Then just activate the map using the latest version of FastActivate or other favourite tool to create a meta.dct AND a tmeta.dct in the map folder & activate the celebrity voices and away you go.
    Remember you can have the navcore on the internal memory and the map folder on an SD card BUT ONLY on the x20/x30/x40/x50's, NOT on any older devices where they must be together (internal or SDHC card)

    Only proven to work with x00, One's, One XL's incl One XL HD Traffic (NOT One XL IQ), x10, x20, x30, x40, x50's provided they have an SD/MicroSD card slot or 4GB internal memory like the 910/920/930/940/950.

    Notes:

    1. The version for the x20, x30, x40, x50 is just a clean/full dump of an original navcore (not just the .cab) which is suitable for these devices.

    2. Specifically for the GO 700 you will need to remove the following to get this to fit on the 2.5Gb internal memory (because this was created for the non-mic 300 & 500 and therefore doesn't have the ASR folder)
    2a. From the navcore:-
    Vocaliser folder (no more computer voices), Helpme folder (no more straight to nearest doctor/dentist etc) and remove all but 04 & 05 (UK) voices from the voices folder.
    2b. From the map itself:-
    Cphoneme (used only for Loquendo & Vocaliser computer voices), Cspeech (no spoken address INPUT), crpoi (Compressed Rich Point Of Interest). No more "rich detail" (to see the "rich" detail select Navigate to ... Point of Interest ... POI near you ... select one of the built in categories ... select a POI ... If there is rich detail for that poi then a Details button appears under the phone number on the right of the screen. Click the Details button to see the the rich detail. This is often an address, web site url and email address but is technically capable of including any text and also pictures) and, if you need even more space, faces.dat & faces.met (no more polygons, lakes, forests, buildings - just roads and streets)

    3. For all pre x20 models like the x00's, Ones & One XL's, 510, 710 (but NOT the 910) that were not designed to read SDHC's or have not previously seen/booted from an SDHC card, you FIRST need to load a suitable bootloader (system file) to enable the device to actually boot up from your new 4Gb SDHC Truck card. The easiest way for you to do this is to copy/paste/overwrite the "system" file (extracted from the attached TT_Bootloader_5.5120.rar) or from any of these downloaded dumps to your current standard SD card or internal memory and boot up once with that new system file THEN it will read your new SDHC card.

    4. Specifically for the x10 series to reduce/minimise the possibilty of rebooting/restarting, switch the unit on BEFORE connecting to your power source.

    5. And finally, if you only have 2Gb internal memory & no SD slot then your only option is to try the 2GB version attached



    If you only need the official .cab (for x20/x30's) you can download it direct from [Only registered and activated users can see links. ]
    Attached Files Attached Files
    Last edited by biggerdave; 29th October 2015 at 11:47.
    Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttons
    S i m p l e s

    PS If you find any dead links on MY posts please pm me & I'll try to fix/reload

  2.    Advertissements


  3. #2
    TomTom Expert

    biggerdave's Avatar
    Join Date
    Dec 2011
    Location
    Darn sarf
    Posts
    1,769
    Rep Power
    508

    Default

    Truck 9.700/9.701 tips & tricks (more welcome here)

    If you DO want to use the 9.7** navcore (see other posts/reports about errors in this navcore) because you want to run the v910 or later Truck map (which will ONLY run on this navcore) then here are a couple of tweaks summarised below:-

    Problem 1: When entering Vehicle height you can't add the . "dot" or ' foot mark eg.
    if you want to add 14' 9" high, you can only enter 14' or 15' not between size.


    Solution: if you set height at 14' then tap done...
    it then goes to vehicle width, tap back...it goes back to vehicle height...
    tap the screen anywhere but not on the keypad (this will remove the white box around the 14')
    now enter 9 and then done, this will give you vehicle height of 14'9"
    the same process can be done with vehicle length/height/width


    Problem 2 (ONLY for the x40's): After initial boot up after a hard reset or inserting your truck card when you CAN set your vehicle dimensions, this screen/option is not available again.

    Solution(s):
    1. Change preferences > Planning preferences > Edit vehicle profile from there
    or
    2. Set a new destination and when it's all set up the last screen will tell you your vehicle profile where you can change it

    Also note, if you select "car/taxi/van/other" profile you lose the option to change vehicle profile again unless you remove SD card/reboot/re-insert etc or do a factory reset THEN you have the option back.


    Any other solutions/tips/tricks specifically for these 9.700/9.701 navcores can be posted/asked here
    Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttons
    S i m p l e s

    PS If you find any dead links on MY posts please pm me & I'll try to fix/reload

  4. #3
    Junior Member
    Join Date
    Jun 2012
    Location
    anywhere
    Posts
    1
    Rep Power
    0

    Default

    On my TT one (new edition) everething its ok but no sound. anyone?

  5. #4
    TomTom SModerator

    QUIN1965's Avatar
    Join Date
    May 2012
    Location
    al lado del mundo
    Age
    50
    Posts
    2,600
    Rep Power
    870

    Default

    Quote Originally Posted by v0rtex View Post
    On my TT one (new edition) everething its ok but no sound. anyone?
    Hey look here
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    How to unhide links: After clicking LIKE this post, hidden links will be available.
    sncmz5
    [Only registered and activated users can see links. ]

  6. #5
    Junior Member
    Join Date
    Apr 2012
    Location
    lost in..... paris
    Posts
    1
    Rep Power
    0

    Default

    i need version for x50 (go750), the link posted is offline :-(

  7. #6
    TomTom Expert

    biggerdave's Avatar
    Join Date
    Dec 2011
    Location
    Darn sarf
    Posts
    1,769
    Rep Power
    508

    Default

    Quote Originally Posted by Ziobingo View Post
    i need version for x50 (go750), the link posted is offline :-(
    All my Filefactory (dlc) links are still live
    Please do not post "thanks" but use the "reputation" star(*) bottom/left or "like" bottom/left buttons
    S i m p l e s

    PS If you find any dead links on MY posts please pm me & I'll try to fix/reload

  8. #7
    Junior Member
    Join Date
    Oct 2014
    Location
    LONDON
    Age
    36
    Posts
    3
    Rep Power
    0

    Default

    Hey , trying download one _one _xl navcore , but links are dead/offline ? can you post some fresh ones pleas . many thanks

  9. #8
    TomTom SModerator

    QUIN1965's Avatar
    Join Date
    May 2012
    Location
    al lado del mundo
    Age
    50
    Posts
    2,600
    Rep Power
    870

    Default

    Quote Originally Posted by SIEQIERS View Post
    Hey , trying download one _one _xl navcore , but links are dead/offline ? can you post some fresh ones pleas . many thanks
    Hi new here navcore truck 9702
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    How to unhide links: After clicking LIKE this post, hidden links will be available.
    sncmz5
    [Only registered and activated users can see links. ]

  10. #9
    Junior Member
    Join Date
    Oct 2014
    Location
    LONDON
    Age
    36
    Posts
    3
    Rep Power
    0

    Default

    Quote Originally Posted by QUIN1965 View Post
    Hi new here navcore truck 9702
    [Only registered and activated users can see links. ]
    Sweet , thank you very much mate

  11. #10
    Member
    Join Date
    Feb 2015
    Location
    london
    Posts
    17
    Rep Power
    0

    Default

    Hi there,

    I'm new here. I have a TomTom Go 540 LIVE and was wondering if i can add this navcore and map to my device?
    The device has an SD slot, and i have an 8GB SDHC card.
    can anyone help please?

 

 
Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.