Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    large1
    Guest

    Default tt one v8 wont boot help please

    hi all and may i say that this forum is wicked ive had tom toms before often read bits on hear without being a member, i got a tt one v8 and wanted to update map so i formatted the internal hd fat32 and put on all the files needed, there all there on the hd but it wont boot all i get is a big RED/White X on the startup screen but all files are present on the HD. thanx in advance for any help

  2.    Advertissements


  3. #2
    Ex Staff Member
    Join Date
    Nov 2010
    Location
    somewhere
    Posts
    270
    Rep Power
    0

    Default

    Quote Originally Posted by large1 View Post
    hi all and may i say that this forum is wicked ive had tom toms before often read bits on hear without being a member, i got a tt one v8 and wanted to update map so i formatted the internal hd fat32 and put on all the files needed, there all there on the hd but it wont boot all i get is a big RED/White X on the startup screen but all files are present on the HD. thanx in advance for any help
    clean your device and update your device official navcore with TomTom HOME [Only registered and activated users can see links. ]

    1. install tomtom home
    2. start it and update my device (You may must do it several times.....)

    after that tell as what is your current configuration
    [Only registered and activated users can see links. ]

  4. #3
    large1
    Guest

    Default

    hi mate and thanx for ya prompt reply, right ive tried that it updated ok no probs but it still got the red/white X getting worried now its not mine, tryin to do a favor but its kicking me in the butt, i took a backup formatted, and then put backup back on and updated, still no joy also accessing the tt is very slow and the files wont copy all at once is because of the onboard ram thanx again
    Last edited by large1; 11th April 2011 at 03:28 PM.

  5. #4
    Ex Staff Member
    Join Date
    Nov 2010
    Location
    somewhere
    Posts
    270
    Rep Power
    0

    Default

    Quote Originally Posted by large1 View Post
    hi mate and thanx for ya prompt reply, right ive tried that it updated ok no probs but it still got the red/white X getting worried now its not mine, tryin to do a favor but its kicking me in the butt, i took a backup formatted, and then put backup back on and updated, still no joy also accessing the tt is very slow and the files wont copy all at once is because of the onboard ram thanx again
    Use this tool [Only registered and activated users can see links. ]
    if not work then
    delete mapsettings.cfg from map folder and make hard reset...

  6. #5
    large1
    Guest

    Default

    yep id already tried that no good still cant understand how the files are on the hd but it wont boot , mad

  7. #6
    Ex Staff Member
    Join Date
    Nov 2010
    Location
    somewhere
    Posts
    270
    Rep Power
    0

    Default

    Quote Originally Posted by large1 View Post
    yep id already tried that no good still cant understand how the files are on the hd but it wont boot , mad
    if you plug it to usb can you use it with computer at all ?

  8. #7
    Ex Staff Member
    Join Date
    Nov 2010
    Location
    somewhere
    Posts
    270
    Rep Power
    0

    Default

    if you have ORIGINAL backup, open ttgo.bif and look your bootloader version if it not 1.xxxx series then:
    go here [Only registered and activated users can see links. ]
    Download SE Navcore 8.410.1218

    run exe file, give your tomtom drive letter and replace all files.....start device again

  9. #8
    large1
    Guest

    Default

    right if i plug usb in i can do tt home anything it all works, i had earlier downloaded Navcore 8.544.1838 - 32MB i loaded the files on and still no go, how do i had reset as i cant see a reset like the others have
    thanx again 4 helpin me, i really appreciate it, if i could get it working that would be brill bootloader used 5.5128

  10. #9
    Ex Staff Member
    Join Date
    Nov 2010
    Location
    somewhere
    Posts
    270
    Rep Power
    0

    Default

    power on device keep button down 5sec

    please
    after that tell as what is your current configuration (from original backup)
    [Only registered and activated users can see links. ]

  11. #10
    large1
    Guest

    Default

    heres the original config
    might of got it working now looks like the formatter i used (none windows) added another partition, i kill disked it and just used a normal windows format


    DeviceName=TomTom ONE
    DeviceVersionHW=ONE (v8)
    BootLoaderVersion=55011
    ApplicationVersionVersionNumber=7522
    ApplicationVersionVersion=9270
    CurrentMap=United_Kingdom_and_Republic_of_Ireland
    CurrentMapVersion=825.2159

    ill update ya when finished thanx again

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •