Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 23 of 31 FirstFirst ... 132122232425 ... LastLast
Results 221 to 230 of 303
  1. #221
    Important User

    Ballebar's Avatar
    Join Date
    Jul 2009
    Location
    Off the Grid ...
    Posts
    983
    Rep Power
    968

    Default

    Strange if you can't use USB mass storage mode direct when the unit powers up. Make sure that the unit is powered off completely (press power button ~7 sec.) and not just in screen off / stand-by mode.

    As a last resort you can try a hard reset / master reset. Hopefully you have a backup of the important stuff in your nüvi. A master reset erases all data. Preinstalled maps should be able to re-download from your myGarmin account if you have registered the unit there. Other data is up to you to restore manually.

    Hard reset instructions for nüvi 37xx series
    nuvi 37xx series hard reset:

    1. Power off the unit (press/hold the power button for ~7 seconds)
    2. Power on the unit
    3. When the Garmin copyright screen is displayed, press & hold the bottom-right corner of the screen
    4. Release the screen when "Do you really want to erase all user data?" appears
    5. Touch "Yes"

    If possible after the hard reset (all units), let the unit sit outdoors in the open for about 30 minutes or so to let the unit re-acquire satellite almanac data.
    Don't post thanking posts. Use the "Like"button instead.





    [Only registered and activated users can see links. ]

    NOTICE! Due to other activities I'm now having a very low attention to questions and requests here at GPSPower.

  2.    Advertissements


  3. #222
    Member +
    Join Date
    Mar 2010
    Location
    Brazil
    Posts
    45
    Rep Power
    61

    Default

    Dears,

    I Managed to recover the unit.
    What I made was whe the unit was starting the boot I pressed and hold the power off button until appear a screen asking if I want to power off, ansewred yes and the unit powered of ant then when I tryed to turn it on again it worked.
    The problem is that The Voice Brazilian Potugueses TTS file, The Portuguese text files , the Keyborad Language files and keyboard lay-out files was missing.
    I managed to recover the voice and text files (had it in my back up, but the Keyboard language and lay-out I don't back-up .

    Does anyone can send me such files?

    Thanks

    rtsouza
    Last edited by rtsouza; 22nd October 2010 at 15:58.

  4. #223
    Junior Member
    Join Date
    May 2010
    Location
    India
    Age
    46
    Posts
    4
    Rep Power
    0

    Default regarding Mapsource file & IMG file

    Quote Originally Posted by catymag View Post
    no you need mapsource version and mapsource app installed
    hi friends,
    i have the IMg file of city navigator india NT20 & i have the mapsource software also but when i tried to open that img file it says it is not known format for mapsource etc.
    what do i do is this both file are different? how to open this IMG fiel which is unlocked as it is told while downloading pls. help

  5. #224
    Important User

    Ballebar's Avatar
    Join Date
    Jul 2009
    Location
    Off the Grid ...
    Posts
    983
    Rep Power
    968

    Default

    Quote Originally Posted by prashantrider View Post
    hi friends,
    i have the IMg file of city navigator india NT20 & i have the mapsource software also but when i tried to open that img file it says it is not known format for mapsource etc.
    what do i do is this both file are different? how to open this IMG fiel which is unlocked as it is told while downloading pls. help
    You have some answers for MapSource vs. IMG in the other thread that you asked the similar question.
    Read more [Only registered and activated users can see links. ].
    Don't post thanking posts. Use the "Like"button instead.





    [Only registered and activated users can see links. ]

    NOTICE! Due to other activities I'm now having a very low attention to questions and requests here at GPSPower.

  6. #225
    Junior Member
    Join Date
    Sep 2010
    Location
    Zagorje ob Savi,Slovenija
    Age
    63
    Posts
    1
    Rep Power
    0

    Default

    how to add new tide prediction for the Adria bluchart

  7. #226
    Junior Member
    Join Date
    Oct 2010
    Posts
    1
    Rep Power
    0

    Default Display Blue Chart Tidal Stream data on GPSmap 76CSx

    Greetings

    Recent bluechart G2 marine charts contain tidal stream data as well as tidal heights (i.e. direction/strength at 'tidal diamond' locations). This can be displayed in Homeport but my GPSmap 76CSx sees them as tidal height POIs so cant display the data correctly.

    Is ther a fix work around for this problem.

    Many thanks

    Nick Mack (newbie)

  8. #227
    Junior Member
    Join Date
    Oct 2010
    Posts
    1
    Rep Power
    0

    Default

    Hello,
    new to this forum, but I have some problem that hoppin to be solved here I have some China Happy People GPS with WinCE NET5.0 that I've manage to start Garmin 5.00.20wp but I can't unlock the software, including the maps. I know that i need to know the Card ID to put in the jetmouse keygen and the code to put in the sw.unl txt file but where can I find the cart id and where to put the sw.unl file ( in the runGMXT or in the root folder of the sd card ) ?

    thanks

  9. #228
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,627
    Rep Power
    5323

    Default

    Quote Originally Posted by markecx View Post
    Hello,
    new to this forum, but I have some problem that hoppin to be solved here I have some China Happy People GPS with WinCE NET5.0 that I've manage to start Garmin 5.00.20wp but I can't unlock the software, including the maps. I know that i need to know the Card ID to put in the jetmouse keygen and the code to put in the sw.unl txt file but where can I find the cart id and where to put the sw.unl file ( in the runGMXT or in the root folder of the sd card ) ?

    thanks
    all the answers here
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  10. #229
    Member +
    Join Date
    Apr 2010
    Location
    Europe
    Posts
    47
    Rep Power
    30

    Default

    Garmin Mobile XT Help please, again!

    I know this has been covered again and again, so please be patient, I've spent hours trawling through the tutorials with no sucess.

    After recent purchase of Acer Neotouch running WM6.5, I followed the tutorial on the installation of Garmin Mobile XT. I downloaded a version that included City Select Europe 2010 (unlocked), got my MicroSD card ID and using the Keyjen, got my code, pasting it into the sw.unl file. This all worked, but as I have the 2011 Europe CN, and some Bluecharts, I wanted to upgrade and put multiple mapsets on the unit.

    Using Mapsource and a SD card reader (Acer neotouch doesn’t come up as an independent drive using Windows XP), I transferred several mapsets (CN Europe 2011, Atlantic Bluechart 2008.5, and a few other small mapsets) onto the SD, Mapsource telling me that it was erasing what was already on the sd card (the City Select Europe 2010 I suppose), and once transferred, I removed the SD card from PC, and back into the PDA.

    As I believed everything previously installed was erased, I installed the Garmin Mobile XT version directly off the Garmin website. I'm not sure how critical it is to use the version off Noeman or if the Garmin version would do.

    When I start Garmin Mobile XT(browsing to the SD card and running QuePPC), it started but it takes ages, about 5 mins, to load up(possibly because there’s 2GB worth of mapsets), but now all my mapsets are locked, with only a base map available. The window states that " You have loaded a map that is locked. Select Purchase & Go to Purchase. If you have already purchased the map, simply enter your product key" and 3 options of Purchase & Go, Enter a Product Key, & Continue. I have hit 'Continue' to get just the basemap, and also tried 'Enter Product Key', but this gives the requirement to enter an 8 digit character code (JM keygen only gives a 25 key code when you enter the map ID into the lower window)
    I soft resetted the PDA with no success.
    I also tried using a different generated 25 character code from the JM keygen (using the SD card ID) but this didn’t work.

    The reason I used Mapsource was my thinking that by multiple selection of mapsets, you only end up with 1 GMAPSUPP & 1 GMAPBMAP, however this might actually be the cause of my problems.

    My Questions:

    Do I need to use the Jetmouse generated unlock code from the mapsets(from the JM generated Map ID code for that particular mapset) rather than the 25 character Software Unlock code (JM generated from the SD ID) to paste into the sw.unl?, i.e Do I use the SD ID generated software unlock code or the Map ID generated unlock code to paste into sw.unl

    If I have to use the Map ID generated code, how do I put multiple Map ID codes into the sw.unl file (e.g For City Navigator Europe is 2204, For Atlantic Bluechart is 355)?

    Or am I limited to just one mapset with Garmin Mobile XT(if this is the case, then I will uninstall Garmin Mobile XT and use Garmin Que, even though its not compatible with City Navigator 2011).

    Can anyone clarify this, have I done it in a completly wrong way, or am I missing some crucial step?

    Many thanks

  11. #230
    Important User

    Ballebar's Avatar
    Join Date
    Jul 2009
    Location
    Off the Grid ...
    Posts
    983
    Rep Power
    968

    Default

    @EIcojo

    If you use MapSource and want to transfer a mapset to a device then you need to have unlock codes for every locked map in the mapset.
    All maps in the "gmapsupp.img" mapset must have unlock codes or else your "gmapsupp.img" will be locked.

    [Only registered and activated users can see links. ] (eg. usage of 10 locked maps needs 10 unlock codes)
    or use an unlocker like the [Only registered and activated users can see links. ] to remove the locking completely.

    Use [Only registered and activated users can see links. ] and it's file details listing to detect the unlock codes inside your "gmapsupp.img" file.
    Don't post thanking posts. Use the "Like"button instead.





    [Only registered and activated users can see links. ]

    NOTICE! Due to other activities I'm now having a very low attention to questions and requests here at GPSPower.

 

 
Page 23 of 31 FirstFirst ... 132122232425 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.