Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Likes Likes:  0
Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Oct 2010
    Location
    Suisse
    Posts
    3
    Rep Power
    0

    Talking Garmin 3790T for POI remains Valid

    Hello,

    I noticed when one mets these POI personal, it is impossible to validate the POI garmin and these personal POI, I thus have famous the existing bases of POI into tiny and between the names of the base ex: FranceCyclopsSample.gpi, files original I have it famous: france_cyclops_sample.gpi, I did that for all the files which were in file POI, and the last file which I have just put the radars Switzerland I have famous the file, poi.gpi, in radars_suisse.gpi, then I was in the option Outils, Paramétres, Navigation, then to click Automobile, and Alarms of proximity and then Alertes, there is just to note in this Menu: Pts interest personn. of notching, I backed up, then I recontrolé to see by making same handling Outils, etc… juqu' in small Atertes, all was Ok. I extinguished the 3790T to see Ci by relighting it this box was always notched and tou was Ok. Here I hope that will be able to help all the owners of GPS Garmin 3790T. I invite you to inform me of your comments because on my 3790T after several ignition and restarting all is OK. Thank you for advances. Small Precision, Files of the Cyclops bases of origin in votr GPS (FranceCyclopsSample.gpi) which were renonné: france_cyclops_sample.gpi and of the base even create by you and renonné as indicated are visible while selecting: To click: Or outward journey? , to select: Supplements, then to click on Point of interest personalized and you see all the files radars of your base personnel and those of the other Cyclops bases HAVE.

    Traduction French in English Systran Prenium 6.0

    Bonjour,

    J'ai remarqué quand l'on mets ces POI personnels, il est impossible de valider les POI garmin et ces POI personnels, j'ai donc renommé les bases existantes de POI en minuscule et entre les noms de la base ex: FranceCyclopsSample.gpi, fichiers originale je l'ai renommé : france_cyclops_sample.gpi, j'ai fait cela pour tout les fichiers qui étaient dans le dossier POI, et le dernier fichier que je viens de mettre les radars Suisse j'ai renommé le fichier, poi.gpi, en radars_suisse.gpi, ensuite j'ai été dans l'option Outils,Paramétres, Navigation, ensuite cliquer Automobile, et Alarmes de proximité et ensuite Alertes, il y a juste noter dans ce Menu : Pts intérêt personn. de cocher, j'ai sauvegardé, ensuite j'ai recontrolé pour voir en faisant la meme manipulations Outils, etc... juqu'au menu Atertes, tout était Ok. J'ai éteint le 3790T pour voir ci en le rallumant cette case était toujours coché et tou était Ok. Voila j'espère que cela pourra aider tous les possesseurs de GPS Garmin 3790T. Je vous invite à me faire parts de vos commentaires car sur mon 3790T aprés plusieurs allumage et redémarrage tout est OK. Merci d'avances . Petite Précision, les Fichiers des bases Cyclops d'origine dans votr GPS( FranceCyclopsSample.gpi )qui ont éte renonné : france_cyclops_sample.gpi et des base crées par vous même et renonné comme indiqué sont visible en sélectionnant: Cliquer : Ou aller? , selectionner : Supléments, ensuite cliquer sur Point d'interets personnalisés et la vous voyez tout les fichiers radars de vos base personnel et ceux des autres bases Cyclops EU.
    Last edited by Bernard57; 26th October 2010 at 12:55 PM. Reason: Addition of precision display POI

  2.    Advertissements


  3. #2
    Senior Member
    Join Date
    Oct 2010
    Location
    Oz
    Posts
    114
    Rep Power
    26

    Default

    Fault in current fW2.5 should be fixed in next release.

    Temporary solution is:
    For default Garmin speed cameras and a user defined POI file installed:
    To set alerts for both:
    Un-tick both Garmin POI and your own POI file. Press save.
    Next tick only the Garmin POI, leaving your own un-checked. Press save.

    To clear alerts for both:
    Un-tick both Garmin POI and your own POI file. Press save.
    Next tick both Garmin POI and your own POI file. Press save.

    To reset Alert for Garmin POI file only:
    Clear both Alerts as for step above.
    Tick 'own' POI file. Press save.
    On Proximity Points/Alerts screen Under Alerts should show Enabled.

  4. #3
    Frederic1983
    Guest

    Default

    Hi,

    I know that the Cyclops cameras are stored as waypoints in the nuvi devices instead of POI's (Points Of Interest) and doing that way allows to know the orientation of the cameras.
    Explainations here: [Only registered and activated users can see links. ]

    BUT:

    After the install, all the cameras are listed in the waypoints folder in my nuvi 3790T.

    When I bought my device, the preloaded Cyclops cameras ("...sample.gpi" files) were not visible in the waypoints folder of my nuvi and have worked normally.

    Now, a big list of cameras is stored in my waypoints folder. My nuvi 3790T allows 1000 waypoints maximum and the only file called "safety_camera_belgium_luxembourg.gpi" fills completely the waypoints folder. This doesn't look tidy and I can't use my waypoints anymore with such a huge list of cameras.
    Furthermore, I really don't need to navigate towards safety cameras !

    So my questions are:

    1 ) Is it possible to have the updated cameras files in my device without having them as a visible list in the waypoints folder ?

    2) Is it possible to store more Cyclops cameras in my device than the number of waypoints allowed ? Because the only file for Belgium/Luxembourg contains more cameras than the limit of POI of my device. So I suppose that all are not shown.
    And so, what about the other countries stored in my device ? (I also unlocked cameras for other countries, but they are not visible in my waypoints folder).

    I'm waiting for your answer.

    Thank you in advance.

    Fred.



    GOOGLE TRADUCTION (french) :



    Salut,

    Je sais que les caméras Cyclops sont stockés sous forme de waypoints dans les dispositifs nuvi plutôt que comme des POI (Points Of Interest) et faire de cette façon permet de connaître l'orientation des caméras.
    Explications ici: [Only registered and activated users can see links. ]

    MAIS:

    Après l'installation, "toutes" les caméras sont répertoriés dans le dossier waypoints dans mon nuvi 3790T.

    Quand j'ai acheté mon appareil, les caméras préchargé Cyclops (fichiers "... sample.gpi ") n'étaient pas visibles dans le dossier waypoints (= favoris) de mon nuvi et fonctionnaient normalement.

    Maintenant, une grande liste de caméras est stockée dans mon dossier waypoints. Mon nuvi 3790T permet un maximum de 1000 waypoints et le seul fichier appelé "safety_camera_belgium_luxembourg.gpi" remplit complètement le dossier waypoints. Ceci ne semble pas bien propre et je ne peux plus utiliser mes waypoints avec un tel nombre de caméras.
    En plus, je n'ai vraiment pas besoin de naviguer en direction des caméras de sécurité!

    Donc, mes questions sont les suivantes:

    1) Est-il possible d'avoir les fichiers de caméras mis à jour dans mon appareil, sans les avoir comme une liste visible dans le dossier waypoints?

    2) Est-il possible de stocker plus de caméras Cyclops dans mon appareil que le nombre de waypoints autorisés? Parce que le seul fichier pour la Belgique/Luxembourg contient plus de caméras que la limite de POI de mon appareil. Donc je suppose que toutes ne sont pas représentées.
    Et alors, qu'en est-il des autres pays stockés dans mon appareil? (J'ai aussi débloqué des caméras pour d'autres pays, mais elle ne sont pas visibles dans mon dossier waypoints).

    Je suis en attente de votre réponse.

    Je vous remercie à l'avance.

    Fred.

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •