Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 1 of 14 12311 ... LastLast
Results 1 to 10 of 137
  1. #1
    TomTom SModerator

    QUIN1965's Avatar
    Join Date
    May 2012
    Location
    al lado del mundo
    Age
    50
    Posts
    2,603
    Rep Power
    871

    Car MYWAY RNEG / MODIFIED Peugeout WipNav 2015-1

    Citroën MYWAY RNEG / MODIFIED Peugeout WipNav 2015-1
    sinttulocolorreal91


    RNEG Maps / MyWay / WipNav 2015-1
    2015-1 maps for RNEG / MyWay browser. Continue with the same protection system as above, so a copy "as is" original card will not work in versions higher than the 20.16 browser. Able to download the version that is already modified and proven performance in all browser versions , including the latest, 50.03 .
    Installation Instructions:

    1) need a greeting card at least 16gb . Even if there is no 8gb card with some more space to fit . In any case it is advisable for the 16gb so we have room to spare for next versions. If you are going to buy , it better be in class 10 being the fastest , but also a slower work , although you may notéis more pulls the scroll maps.
    2) Download all the files in a pack . You can download them one by one. If you have premium accounts Uploaded.to go down faster and you can download several at once . If not, wait between download and download , or only one at a loss . You can use the jdownloader program because you will automatically download them all (always with the aforementioned limitations) and even I decompress the folder that you indiquéis .
    3) Create a temporary folder on the computer hard drive and unzip all the files on it ( if you've used jdownloader and surely have unzipped ) . Do not unzip all files . Suffice it to unzip the file first and decompressor automatically gets the other files until finished.
    3) I you will find a folder named "database" in that temporary folder on your hard disk. you must copy the entire folder with all its contents to the SD card. You can do it with " copy and paste " or by dragging with the mouse.

    Done.

    I remind you that the most common problem is usually that the browser does not recognize the SD card. In that case, you only have to remove it again , wait a few seconds and re-enter , and must recognize smoothly. If it still does not recognize it is a matter of repeating the process several times that eventually just taking the trouble .





    MyWay WipNav RNEG 2015-1 maps Europe + Morocco for all firmware (download)
    111568d1402398880 rt6 emyway wip nav fresh 2014 1 maps europe peugeot europe large


    This newly updated HERE map of Europe/Morocco for your Citroën MyWay (RNEG) navigation system covers millions of square kilometers and many points of interest in the following countries: Albania, Austria, Belarus, Belgium, Bosnia Herzegovina, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy , Kosovo, Latvia, Lithuania, Luxembourg, Macedonia (F.Y.R.O.M), Moldova, Montenegro, Morocco, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovak Republic, Slovenia, Spain , Sweden, Switzerland , Ukraine, United Kingdom .

    In this new Citroën map update more than 14,653 roundabouts, 279,330 street names, 11,247 one way streets and 76,507 turn restrictions have been added or amended.

    In addition to precise routes, these clear, rich maps feature many POIs: golf courses, theatres, hotels, car parks and much more making this latest edition of Citroën digital map the perfect guide to motoring through Europe/Morocco.

    This HERE map is compatible with the following Citroën Sat Nav: MyWay (RNEG)





    Code:
    Please Login or Register to see the links
    Credit dvdnav

    or

    Code:
    Please Login or Register to see the links




    Software RNEG Citroën MYWAY / Peugeout WipNav
    Spoiler: firmware
    R50B RNEG firmware 50.03
    [Only registered and activated users can see links. ]



    firmware RNEG 40.03 R40b
    [Only registered and activated users can see links. ]



    firmware RNEG 33.09 R33b
    [Only registered and activated users can see links. ]



    firmware RNEG 29.01 R29a
    [Only registered and activated users can see links. ]



    firmware RNEG 27.01 R27bis
    [Only registered and activated users can see links. ]



    firmware RNEG 20.16 R20h
    [Only registered and activated users can see links. ]




    RNEG 50.03 R50B
    Various bug operation :

    • Restarting the beginning of a random calculations in breadcrumb
    • Several bugs in Bluetooth ( Incompatibility with some phones, Bluetooth pairing loss at the beginning of a phone call, poor sound quality )
    • The "unknown" message appears instead of the name of the caller when a call is received
    • Incorrect calculation of radar speed for vehicles with unit speed in miles
    • (on Latin America) Navigation ( RNEG ) restarts to activate the "Demo Mode" navigation
    • In navigation mode : Cursor frozen in GPS mapping . GPS setting cursor in relation to the actual vehicle position
    • Estimated time of arrival or underestimated during guidance
    • Random loss of audio settings after starting the engine
    • Loss of random sound after starting engine
    • defective sound audio speakers after starting the vehicle
    Random • Yellowing of multifunction display
    • Loss of time and random altitude
    • Call History not visible in the multifunction display


    RNEG latest version R50B 50.03

    Spoiler: 50.03
    [Only registered and activated users can see links. ]




    Click Browser software update :

    First remember that the software is the same for Peugeot and Citroën. The car recognizes the browser and displays the logo of one or another brand . You can go to any version other than either a higher or lower version .

    1) Unzip the file with the software to a folder on your hard disk.
    2) Copy the CD contents to an empty SD card. While empty , whatever. The card then obviously be reusable for something else, because once the process made ??the card does not help us at all , unlike card maps have to be entered in the browser to work mandatory .
    3) IMPORTANT : Start the car . With the browser on, Insert the card in the browser. Asks you if you want to upgrade the software message appears. Press the button on the browser to accept the command .





    The process takes about 20 min . We must have started at all times so that no mode energy saving car. You will find that the process is indicating two percentages: At the top of the percentage remaining copy of each file , and under the overall percentage of the process indicated . At the end of the process the browser restarts. A message indicating that the process was successful appears. Sorry REMOVE THE CARD with the software, and press OK . If we do not remove the card may again ask if you want to update and press OK inadvertently back again , which starts the process again and CAN NOT STOP . To me the first time you update I did not realize the detail and went back to push the button ... and back to wait another 20 minutes as mo can not stop the process to avoid problems. It is best when the message that the process has completed BEFORE PRESS OK appears, withdraw the card with the update software .


    f40b06a1645ee4e7abebc15bfb864010o

    Therefore it is advisable to reset the browser using the parameters corresponding menu option. If you observe any hits or something wrong with the operation, it is best to do a total reset. This will have to remove the battery clip a few minutes and then back on to reset it.

    Greetings.


    Spoiler: radars
    Fixed radars Aug... 2015
    [Only registered and activated users can see links. ]
    mirror
    [Only registered and activated users can see links. ]

    Fixed Radars Europe + Spain and Portugal Mobile Sept.. 2015
    [Only registered and activated users can see links. ]


    Remembrance for those who do not know how to do to install the radar:

    1) Download the file to your PC. In the SD card You will find that there is 1 folder called "database".
    2) Copiais downloaded files within "database" on the SD card, overwriting if the files already exist.


    002ecu
    003ffs
    004mqh
    005pob
    006wj

    For the system to "advise" the radar (if already configured before, no need to change anything):

    1) Press NAV button, then go to "Menu Navigation", then "Settings" and then "Configure risk areas"
    2) found three of these options:

    Enable risk areas, Beep Sound and Visual Warning

    Activate the 3 options and ready.

    For safety, it is recommended that a copy of the SD card charging before touching or changing anything.

    You enjoy them and to caution
    Last edited by QUIN1965; 17th September 2015 at 19:45.

    [Only registered and activated users can see links. ]

    How to unhide links: After clicking LIKE this post, hidden links will be available.
    sncmz5
    [Only registered and activated users can see links. ]

  2.    Advertissements


  3. #2
    Junior Member
    Join Date
    Jun 2015
    Location
    UK
    Posts
    3
    Rep Power
    0

    Default

    Hi - I have hit an problem during the install of the firmware (50.03), I'm upgrading from 20.07.

    Here is a photo of the screen that I am stuck on 2d1sjdk

    The CD is now stuck in the drive and every 12 minutes the installer loops rounds. All the buttons are dead, so I can't eject the CD.

    Can you help?

  4. #3
    Master janch's Avatar
    Join Date
    Jun 2010
    Location
    Hell
    Posts
    494
    Rep Power
    152

    Default

    Solution:

    1. you need to take unit out
    2. you need to disassembly the unit in order to take out the jammed CD -->

    3. reboot the unit without any CD/SD inside
    4. wait.....The boot process will finish by itself passing the emergency update (it usually does)
    5. If the system still hangs in the recovery mode, than burn firmware CD with the version which was before the update!

    Good luck!
    Last edited by QUIN1965; 4th June 2015 at 11:46. Reason: edit video

  5. #4
    Junior Member
    Join Date
    Jun 2015
    Location
    UK
    Posts
    3
    Rep Power
    0

    Default

    Hi Janch,

    Thanks for the reply, I've followed the steps and the youtube video. Managed to remove the CD, plugged it all back together and then was hit with this screen

    [IMG]xol9wm[/IMG]

    I've tried to insert the 50.03 CD back in to the drive but it's doesn't take the CD, buttons are still dead.

    I'm currently downloading the 27.01 version, will try the upgrade using an SD card. Will update the thread with progress but in the meantime do you have any other ideas? I was wondering if I might have taken the CD out of the drive at the wrong time?

  6. #5
    Master janch's Avatar
    Join Date
    Jun 2010
    Location
    Hell
    Posts
    494
    Rep Power
    152

    Default

    As I told you, at this point you need initial firmware (20.07) which was installed before the update which have failed. Only after that you can try to reinstall the latest version 50.03 again. Also make sure that you make a good copy of the firmware CD. Slow burning speed, Verbatim CD..But that is just a theoretical solution, pointed to me from the GPS expert when my friend struggles with exactly the same problem few weeks ago. But obviously he was lucky, because in his case that emergency update screen resolved the problem by itself just after he took out the CD.

    If nothing works, this is your last resort:
    [Only registered and activated users can see links. ]
    Last edited by janch; 7th June 2015 at 19:43.

  7. #6
    Junior Member
    Join Date
    Jun 2015
    Location
    UK
    Posts
    3
    Rep Power
    0

    Default

    Thanks - yep, followed your advice and have got an older firmware version installed and working, phew. Thanks for the advice, massive relief to have it fixed.

  8. #7
    Master janch's Avatar
    Join Date
    Jun 2010
    Location
    Hell
    Posts
    494
    Rep Power
    152

    Default

    I'm glad that you sorted it out! Did you use CD or SD as a rescue disc?

  9. #8
    Junior Member
    Join Date
    Jun 2015
    Location
    x
    Posts
    1
    Rep Power
    0

    Default

    Hi there! Put all the files on a 16GB SD card but the system doesn't recognise it, ejected it and inserted again several times. Also did a system reboot but that didn't solve it. Any ideas what to check?

    Thanks in advance!

  10. #9
    Master janch's Avatar
    Join Date
    Jun 2010
    Location
    Hell
    Posts
    494
    Rep Power
    152

    Default

    folder database must be on the root of the SD card.

  11. #10
    Junior Member
    Join Date
    Jun 2015
    Location
    Lombardia
    Posts
    1
    Rep Power
    0

    Default

    I had trouble recognizing the SD 16gb but I tried to turn off the engine and wait a few minutes. Inserted the SD and restarted the engine perfectly recognized. It works great! Thank QUIN1965.

 

 
Page 1 of 14 12311 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.