Thank you guys,
I was able to have TTS enabled in my IGo Primo.
I think CS10 means 2 TTS enabled *.zip files in voice folder.
which files to use for Nextgen on WinCE 6.0 ? pls also share the Sys.txt file here pls...
Are you testing only those two files? That is, make sure only those two files are in the content/voice directory. Also make sure you're using only Nuance library (no Loquendo).
Last edited by osiris4isis; 5th February 2016 at 01:39 AM.
Ah ok, I have other files in there as well.
Probably whatever came with the Ferrari Next Gen pack by default.
So your saying that the ONLY two files in VOICE should be the zip files I provided correct?
May help to enable logging for the iGo app (temporarily) - would probably tell you what the issue is. Here is a post that describes how to enable logging:
[Only registered and activated users can see links. ]
I think this would help a lot of folks figure out what is causing certain issues.
Sent from my HP SlateBook 10 x2 PC using Tapatalk
If problem still exists, try recopying the library over again; if the files were corrupted when it was copied, it gives similar symptom.
Update: You originally said you were using 188.8.131.525512 (Primo Truck 2014), but now you're saying NextGen. The voice pack in this thread is very old and is for old Primo, not NextGen. So it's not guarantee to work with it; you might have to post in the NextGen thread that you're using from, so others might know and help you.
Last edited by osiris4isis; 5th February 2016 at 12:31 PM.
Excellent, will give that a go, and if still an issue with just 1 file in there, i'll try the logging mode as posted above, and then report back.
Thanks for your help everyone!