Open notepad (or similar)
type (or copy/paste)
[gps]
port=auto
baud=auto
Save as sys.txt
Copy in the main root of IGO/Primo (that is in the same folder as the .exe file is in)
Thanks for your reply.
I have gone through all the folders and files on the SD card but cannot find anything relating to a sys.text so im not sure if it is there and I juct cant find it.
If I write it in myself as you typed which folder do I put it in?
Thanks for your help
Open notepad (or similar)
type (or copy/paste)
[gps]
port=auto
baud=auto
Save as sys.txt
Copy in the main root of IGO/Primo (that is in the same folder as the .exe file is in)
Ok ive just found file listed as sys so ive put in the text as you guys have suggested.Just going to go and try it in the car.
Will update shortyl.
Thanks
Ok just tested in the car again and still no fignal.
Last edited by Boki; 13th March 2018 at 12:52 PM.
Try this:
Copy in sys.txt the following (but copy at the top of your sys.txt) because don't know what entries you have:
[gps]
port="1"
baud="4800"
source="nmea"
set_messages=0
if it will not work think that this will fix problem:
[gps]
port="2"
baud="57600"
source="nmea"
set_messages=0
After copying each of those settings don't forget to delete folder "save" you can find this folder: Primo2.4\save
Thanks ill try the above now and let you know.
This is what is currently written in the sys folder...
Spoiler: part of sys
Last edited by Boki; 13th March 2018 at 12:52 PM.
It looks good, but it is only the values under [gps] section that can make your gps work.
Port can be from 1 to 8, Baud can be 4800 or 9600 or 19200 or 38400 or 57600. You have to find the right combination or set it to "auto" and let Primo figure it out.
But primo needs time for it, which can take up to 30 minutes to find satellites, so don't be hasty thinking Primo doesn't find satellites. Also delete the save folder so that wrong values from previous attempts (can be downloaded save folder from different device) does not interfere.
Maybe im not leaving it too search long enough for signal so ill give it another go tomorrow when I get home from work.
Really appreciate your help and patience.
Well I tried the suggestions above and none seem to work.
Maybe I should try and download another copy or try a different program such as Sygic?
Anyone have a download link they hink might be useful to me?
Last edited by Boki; 3rd December 2017 at 12:06 PM.
hi!
i replaced my head unit with a chinese thing, domain brand and i got the igo primo gps installed on it. is there anyway i can update the maps? i attached some images taken from the screen. i'm from new zealand.
Spoiler: pics
thank you in advance for the help.
Last edited by Boki; 19th February 2018 at 09:24 AM.
Bookmarks