I have an chinese 2din radio navigation unit..
CASKA CA-3636G
hardware model EUR-EN-GBR01/31
MST776 version 06/01 wince 5
on unit is currently instaled iGO Primo NextGen 9.19.1.484935 [WinCE]
wnavigation works well but no TMC infos recived....
in sys.ini i have insered
[tmc]
port="COM,1"
source="royaltek"
and try also to change ports from 1 to 3 but with no success.
The unit have a tmc as they declare....
any idea...how to get tis work properly...
Anyone have this peace of..2din with nexgen instaled ??
Thanks...
@De5i
Can be your TTS engine not fitting the device firmware. There are other possibilities of course, could be a corrupt map file or even any other file.
Backup everything and remove files leaving basemap only, then re add them one by one and test until you don't find the offending file.
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
I have tried all the possibilities and it will still not work. The same content works with iGO Primo app therefore there can't be any corrupt files, if I use the same content with the Nextgen app it crashes, I believe the issue is with the unit itself.
Last edited by Boki; 4th May 2019 at 04:22 PM.
Hi De5i
Did you download my latest version of TTS voices? Maybe that works. Otherwise try my last version for S100 14-03-2016. I just oploaded it with minor changes. Allso in sys.
Hi De5i. I asume that you had a working navigation program in your unit. Can you put it in 7zip or rar file completely? Maybe it is possible to find a solution. Do you only have this problem with Nextgen?
And try to startup without the licenses and maps. and see if you have still the fatal error.
The unit will run iGO8 and iGO Primo navigation programs without a problem, the only navigation program not working in the unit is Nextgen. I believe the problem is with the head unit, as I have Nextgen working in another 2 DIN head unit, it will just not work in this unit.
Yes I have downloaded you latest version, I don't have the issue with the TTS as the app is not even getting that far to select the voice. Looking through the crash log it crashes way before the loading screen appears on the screen, the crash log shows it crashes just after camera.ini
--------------------- Camera.ini ----------------------
[camera]
gcx=0
gcy=0
zoom=0.000000
tilt=0
rotation=0
engine=0
Registers:
R0=013e0000 R1=00000000 R2=000ef7f0 R3=0149c000
R4=00000be0 R5=0121fbe8 R6=00000000 R7=0121fbe8
R8=026432bc R9=026432bc R10=00f479a0 R11(fp)=00000000
R12(ip)=00000000 R13(sp)=0121f110 R14(lr)=000c6040 R15(pc)=40062de4
this is where the app dumps the crash, information, and no has the program even got to the loading screen.
Can you send me your Primo version that worked? So not the downloaded one, but the one you used. You can upload it and send me the link in private message.
Camera.ini is from making a screenshot in Nextgen. That is weird. Capture screen you can find in ux folder labs.zip. I think you need this file for shure, but you can try to disable the zip en see if program starts. Otherwise maybe Frontzosd can see what the problem causes.
I have already shared this file it is posted in my post #141. I have disabled the labs.zip file tried again and still I get the same fatal error and the sane crash log as posted.
Hi there,
As a newbie, I need some help with my nng nextgen navigation running on Hyundai Tucson 2016 multimedia. The original nngnavi.exe shows version 9.18.23.572746. I'm not sure which version of WinCE it runs on but i'm sure it is not 5.0. It is either 6.0 or newer if there is one.(Windows embedded Compact 7.0?)
Just like other original car multimedias it works seamlessly with the car radio, rear camera, bluetooth functions etc. I am able to boot into the windows and take/put files to USB.
I'm an old avic user and in the old times we were able to hack the original ezrider.exe so it could work with all map files regardless of which license file is there. From what i understand from the forum posts, igo nextgen works differently and needs a license for everything. My question is if I download new 9.19 files for WinCE from the forum (ZENEC or AVIC)..
a) Will they work with my multimedia only by replacing the original nngnavi.exe file
b) Even if it works would it be compatible with the rest of the functions (radio, bluetooth, etc) or would I loose the original functionality, resolution etc.
c) Are the ZENEC or AVIC files on the forum license free so I can put my own maps in the future?
d) If not, would I be able to put a map and its original license file to the content directory and still use it? (I think the original basemap and device.nng file would not allow this. Is there a way around?
d) Do I need to do anything with my device.nng files?
Many thanks in advance for any help.
Last edited by alien2000a; 23rd March 2016 at 10:41 PM.
I'm pretty sure that you no one can answer these questions.
You want to play with a very expensive system in the expensive car. Very new model. The responsibility is only up to you, it's your money.
You've got to try, then inform us which is the result if you want. Of course always do the backup before any attempts.
The only thing I can give you as general information, basemap has nothing to do with it. Basemap is not locked. Also, you can delete device.nng (backup it just in case), your navi will generate it again.
Last edited by Boki; 22nd March 2016 at 09:23 AM.
Bookmarks