Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 4 of 15 FirstFirst ... 2345614 ... LastLast
Results 31 to 40 of 146
  1. #31
    Important User

    zervdim's Avatar
    Join Date
    Mar 2013
    Location
    Salonica
    Posts
    751
    Rep Power
    706

    Default How to create my Raster Map?

    [Only registered and activated users can see links. ]

  2.    Advertissements


  3. #32
    Important User

    zervdim's Avatar
    Join Date
    Mar 2013
    Location
    Salonica
    Posts
    751
    Rep Power
    706

    Default How can I have more than 1 Primo in Internal Memory of my Device?

    Create in your Internal Memory of Device a folder: content
    Inside content create folders: map,poi,dem,building,raster

    So, folder content must be:
    Internal Memory\content\map\copy here maps
    Internal Memory\content\poi\copy here poi
    Internal Memory\content\building\copy here building
    Internal Memory\content\dem\copy here dem

    So , now you can have 1 content folder in Internal Memory and all Primo will read this folder but you must write in sys.txt of each Primo the following:


    [folders]
    has_secondary_root=0
    sdcardpath="\My Flash Disk\content"
    buildings="..\..\content\building"
    dem="..\..\content\dem"
    poi="..\..\content\poi"
    maps="..\..\content\map"
    phoneme="..\..\content\phoneme"
    raster="..\..\content\raster"

  4. #33
    Important User

    zervdim's Avatar
    Join Date
    Mar 2013
    Location
    Salonica
    Posts
    751
    Rep Power
    706

    Default How can I have more than 1 Primo in SD Card?

    Create in your SD Card a folder: content
    Inside content create folders: map,poi,dem,building,raster

    So, folder content must be:
    SDCard\content\map\copy here maps
    SDCard\content\poi\copy here poi
    SDCard\content\building\copy here building
    SDCard\content\dem\copy here dem

    So , now you can have 1 content folder in SD Card and all Primo will read this folder but you must write in sys.txt of each Primo the following:


    [folders]
    has_secondary_root=0
    sdcardpath="\Storage Card\content"
    buildings="..\..\content\building"
    dem="..\..\content\dem"
    poi="..\..\content\poi"
    maps="..\..\content\map"
    phoneme="..\..\content\phoneme"
    raster="..\..\content\raster"

  5. #34
    Important User

    zervdim's Avatar
    Join Date
    Mar 2013
    Location
    Salonica
    Posts
    751
    Rep Power
    706

    Default How to create my Simple Voice for iGO Primo?

    1.Download Software Audocity from here:
    [Only registered and activated users can see links. ]

    2.Install Audocity on your PC.

    3.Using Winrar 3.93 open English Simple Voice for ex. Voice_Eng-us-f1-lua.zip

    4.Inside folder Audio you will see there are about 114 files .ogg

    5.Start with first .ogg file:
    Open Audocity and drag-drop file: you_have_reaced_viapoint.ogg
    As you can see in Audocity this: you_have_reaced_viapoint.ogg file has been created by NNG in:
    Mono
    32-bit float
    22050 hz

    So now you need to record your file, which will have the same name :you_have_reaced_viapoint.ogg
    also you must record voice for your country in Mono-32bit Float-22050hz

    To find out how you can record from your computer via Audocity see this youtube videos:
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]


    After you record voice for each one of 114 files you can hear in Audocity, you can cut space (time without sound from front and back of audio file), you can listen , you can mod and
    at last you must save each file : File\ExportAudio\give name but save as Ogg Vorbis File.

    After you have create for your country all files with voice you like (yours voice or your woman voice) you must copy all this file back to English Simple Voice for ex. Voice_Eng-us-f1-lua.zip
    Also you can find Text to Speech here:
    [Only registered and activated users can see links. ]
    You can write, you can record voice in your PC, you can save file using Audocity.
    You can change info.ini file and flag.bmp to have your own voice.

    Good luck!

  6. #35
    Important User

    zervdim's Avatar
    Join Date
    Mar 2013
    Location
    Salonica
    Posts
    751
    Rep Power
    706

    Default How to create my Speedcam Voice file? What I have to add in sys.txt?

    1.Download Software Audocity from here:
    [Only registered and activated users can see links. ]

    2.Install Audocity on your PC.


    3.Open Audocity

    4.Record for file :MOBILE_SPEEDCAMERA, using Audocity whatever you want such as:
    "Be carefull Mobile Speedcamera Ahead, you will pay a fine"
    This sentence must be recorded in :Mono-32bit Float-22050hz
    Adjust , cut in front or in back this sound file using audocity, listen how it looks like


    How to save this file?
    File\Export Audio\give name for ex.SPEEDCAM but you must save as:WAV(Microsoft signed) 16 Bit PCM

    You must do this process for all aprroach beep sound like:MOBILE_SPEEDCAMERA, BUILTIN_SPEEDCAMERA, etc....
    Then all this file you have create, must copy in a folder named Audio, this folder Audio must be placed in root of Primo like this:
    Primo\Audio\here you must add all the WAV(Microsoft signed) 16 Bit PCM files you have create for speedcamera




    In this case you must delete everyhing about TTS and copy the following:

    Spoiler: Needed to add in sys.txt
    [sound]
    csv_voice_enabled=1
    ding_muted=1
    maneuver_chimes=0
    pause_mp3_sooner=1
    sound_q_length=200
    queue_length="200"
    mute_os_key="1"
    wheelsound="1"
    effect_volume="15"

    [sound.announcer]
    gps_signal_lost=0 ; set "1" if you like to listen it
    gps_disconnected=0 ; set "1" if you like to listen it
    recalc_voice=0 ; set "1" if you like to listen it

    [warning]
    speedcam_enabled=1
    speedcam_warning=1
    speedcam_continuous_approach_beep_when_tonal=0
    overspeed_min_speech_repeat_delay=-1
    overspeed_min_tone_repeat_delay=-1
    speedcam_max_lookahead=1000
    speedcam_maxdistance_from_road=10



    [speedcam_category:0]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,950" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="SPEEDCAMERA"
    overspeed_sound=0
    warn_distances="0:1000"

    [speedcam_category:1]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,950" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="MOBILE_SPEEDCAMERA"
    overspeed_sound=0
    warn_distances="0:1000"

    [speedcam_category:2]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="BUILTIN_SPEEDCAMERA"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:3]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="AVERAGE_SPEEDCAMERA"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:4]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,150" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound_start="REDLIGHT_SPEEDCAMERA"
    approach_beep_sound_end="GPS_Pocket_PC04"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:6]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="RAILROAD_CROSSING"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:7]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,450" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="BUSLANE_CAMERA"
    overspeed_sound=0
    warn_distances="0:500"

    [speedcam_category:8]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="HIGH_ACCIDENT_ZONE"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:9]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="SCOOL_ZONE"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:10]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="TOWN_ENTRY_POINT"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:11]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="REDLIGHT_AND_SPEEDCAMERA"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:12]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="TOLL_BOOTH"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:13]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="HOSPITAL_AMPULANCE"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:14]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="FIRE_STATION"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:15]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="CONGESTION_CHARGE_ZONE"
    overspeed_sound=0
    warn_distances="0:600"

    [speedcam_category:16]


    [speedcam_category:17]


    [speedcam_category:18]


    [speedcam_category:19]


    [speedcam_category:20]


    [speedcam_category:21]

    [speedcam_category:22]

    [speedcam_category:23]

    [speedcam_category:24]


    [speedcam_category:25]


    [speedcam_category:26]


    [speedcam_category:27]


    [speedcam_category:28]


    [speedcam_category:29]


    [speedcam_category:30]


    [speedcam_category:31]
    activated_spoken_type=sound
    approach_beep_spoken_type=sound
    approach_beep_distances="150,550" ; adjust the values depending on how far you want to start listening to the warning
    approach_beep_sound="DANGEROUS_AREA"
    overspeed_sound=0
    warn_distances="0:600"



    Good luck!

  7. #36
    Important User

    zervdim's Avatar
    Join Date
    Mar 2013
    Location
    Salonica
    Posts
    751
    Rep Power
    706

    Default Port and Baud for some Device

    Spoiler: Port-Baud for some Devices
    A
    Acer (Fi) Neo Touch S200 --->Port=7 <> BaudRate=4800
    Acer C530 --->Port=7 <> BaudRate=57600
    Acer N35 --->Port=8 <> BaudRate=57600

    Airis T920 --->Port=2 <> BaudRate=4800
    Altec Navi 430 / 430s --->Port= 1 <> BaudRate=9600
    Altina A800 --->Port= 2 <> BaudRate=4800
    Asus A636 /P535 --->Port=2ή 5 <> BaudRate=4800

    B
    Becker 7928 /7934 /7977 /7988 --->Port=1ή2 <> BaudRate=9600
    Becker Z099 /Z201 --->Port=1 <> BaudRate=57600
    Becker Z203 --->Port=2 <> BaudRate=57600

    Blaupunkt Lucca3.3 --->Port=7<> BaudRate=9600
    Blaupunkt Lucca3.5B --->Port=7<> BaudRate=57600
    Blaupunkt Travel Pilot 300 --->Port=1<> BaudRate=57600



    E
    ETEN Glofiish X600 /Χ650 --->Port=2 <> BaudRate=38400
    ETEN Glofiish X800 --->Port=4 ή7 <> BaudRate=57600

    F
    Fortuna GC430 --->Port=2 <> BaudRate=4800
    Fujitsu Siemens N500 /N520 --->Port=8 <> BaudRate=9600

    G
    Garmin iQue M5 --->Port=2 <> BaudRate=4800
    Globalnav SL4000 --->Port=7 <> BaudRate=57600

    H
    HP IPAQ DataMessenger --->Port=7 <> BaudRate=4800
    HP IPAQ Rx5710 --->Port=1 <> BaudRate=9600
    HP IPAQ Rx5720 /Rx5940 --->Port=7 <> BaudRate=115200
    HP IPAQ 2200 --->Port=8 <> BaudRate=9600
    HP IPAQ 5710 --->Port=2 <> BaudRate=9600
    HP IPAQ 6515 --->Port=7 <> BaudRate=4800
    HP IPAQ Hw2790 --->Port=6 <> BaudRate=4800
    HP IPAQ Hw6915 /Hw6940 --->Port=7 <> BaudRate=57600
    HP IPAQ 214 --->Port=6 <> BaudRate=57600
    HP IPAQ 614c --->Port=7 <> BaudRate=57600

    HTC P3300 --->Port=4 <> BaudRate=4800
    HTC P3600 --->Port=9 <> BaudRate=4800
    HTC P4550 TyTN II --->Port=4 <> BaudRate=4800
    HTC Diamond I --->Port=2 ή 4 <> BaudRate=57600
    HTC Diamond II /Touch3D --->Port=4 <> BaudRate=57600
    HTC Touch 3G --->Port=4 <> BaudRate=19200
    HTC Touch 3G T3232 --->Port=4 <> BaudRate=4800
    HTC TouchCruise / Iolite T4242 --->Port=4 <> BaudRate=57600
    HTC TouchDiamond Pro --->Port=1 ή 4 <> BaudRate=9600 ή57600
    HTC HD /HD2 --->Port=4 <> BaudRate=4800 ή 115200
    HTC Kaiser --->Port=4 <> BaudRate=4800 ή 115200

    I
    I-mate Ultimate 8502 --->Port=9 <> BaudRate=4800


    M
    Magellan Maestro 3200 --->Port=2 <> BaudRate=9600
    Medion E4240 /E4430 /E4440 /P4425 --->Port=2 <> BaudRate=57600
    Medion PNA 200S /PNA 315T /PNA 465T /E3212 --->Port=2 <> BaudRate=4800
    Medion 4410 /P470 /P5430 --->Port=2 <> BaudRate=4800
    Medion E3132 --->Port=3 <> BaudRate=4800

    Mio 168 /A201 --->Port=2 <> BaudRate=4800
    Mio A501 --->Port=4 <> BaudRate=9600
    Mio A700 --->Port=4 <> BaudRate=4800
    Mio C220 /230 /250 --->Port=2 ή 1 <> BaudRate=4800 ή 57600
    Mio C320b /C520 --->Port=2 <> BaudRate=57600
    Mio P360 /P550 /P560 --->Port=2 ή 4 <> BaudRate=4800 ή 57600

    Mio Moov M300 /M330 /S505 --->Port=2 <> BaudRate=57600

    Mio Moov 200 /230 /250 --->Port=2 ή 1 <> BaudRate=4800 ή 57600
    Mio Moov 360 /500 /560 --->Port=2<> BaudRate=57600

    ΜLS 3850 --->Port=1 <> BaudRate=4800 ή 115200
    ΜLS 3860B /4305A-BT --->Port=7 <> BaudRate=4800
    ΜLS 3900 /4400ABT --->Port=1 <> BaudRate=4800
    ΜLS 4400BT --->Port=1 <> BaudRate=115200
    ΜLS 4600 --->Port=6 <> BaudRate=115200
    ΜLS 4800 /4800A --->Port=1 <> BaudRate=115200
    ΜLS 4810 --->Port=7 <> BaudRate=115200
    ΜLS 4810 ΒT --->Port=6 <> BaudRate=115200
    ΜLS T&D 43-A --->Port=1 <> BaudRate=115200


    MyGuide 3100GO --->Port=5 <> BaudRate=9600
    MyGuide 3100 --->Port=7 <> BaudRate=38400
    MyGuide 4200 --->Port=6 <> BaudRate=9600

    N
    NavGear GT-43-3D --->Port=7 <> BaudRate=57600

    Navigon 1200 --->Port=2 ή 7 <> BaudRate=4800 ή 38400
    Navigon 2100Max --->Port=7 <> BaudRate=57600
    Navigon 2110Max --->Port=3 ή 7 <> BaudRate=38400 ή 115200
    Navigon 7210 /8410 --->Port=7 <> BaudRate=38400
    Navigon 8110 /8310 --->Port=9 <> BaudRate=4800

    Navimate 420 Compucon --->Port=1 <> BaudRate=9600

    Navis [CHINA] --->Port=2 <> BaudRate=57600
    NaviGT R435 --->Port=1 <> BaudRate=38400 ή 115200
    Navman PiN --->Port=2 <> BaudRate=4800
    NDrive G800R --->Port=7 <> BaudRate=9600

    O
    OutSourcing NaviBox OS100 --->Port=1 ή 6 <> BaudRate=9600

    P
    Packard Bell GPS400 --->Port=2 <> BaudRate=4800
    Panasonic STRADA --->Port=2 <> BaudRate=4800

    Q

    R
    RoadFinder 135 /143 --->Port=7 <> BaudRate=57600
    RoyalTek RBT-1000 --->Port=2 <> BaudRate=4800

    Rye Traveler 3503 /4306 /4310 --->Port=2 <> BaudRate=4800
    Rye Traveler 4315BT --->Port=2 <> BaudRate=38400

    S
    Shinco 350 --->Port=1 <> BaudRate=38400
    SmartTrip ST- 4308 --->Port=1 <> BaudRate=9600

    Sony Ericsson XPeria X1 --->Port=4 <> BaudRate=19200
    Sony NV-U70 --->Port=5 <> BaudRate=9600

    Sumsung Omnia I /i900 --->Port=3 <> BaudRate=4800 ή 115200
    Sumsung Omnia II --->Port=6 ή 7 <> BaudRate=4800
    Sumsung Omnia Lite B7300 --->Port=7 <> BaudRate=115200

    T
    Takara GP8 /GP10 /GP25 --->Port=5 <> BaudRate=9600
    Tibo B1000 --->Port=1 <> BaudRate=115200
    Tibo S1000 /4150 --->Port=5 <> BaudRate=9600
    Toshiba G810 --->Port=9 <> BaudRate=115200
    Transonic PNA 3166 --->Port=7 <> BaudRate=57600
    Treo v750 --->Port=4 <> BaudRate=9600
    Typhoon Myguide --->Port=1 <> BaudRate=4800



    V
    Vector Master 300 /XM99 --->Port=2 <> BaudRate=38400
    Vector Master 310 /310 --->Port=7 <> BaudRate=57600
    Vector Master 380 /390 /510 --->Port=2 <> BaudRate=4800
    Vector Master 410 WP --->Port=2 <> BaudRate=57600
    Vector Master 590 --->Port=1 <> BaudRate=38400

    Vision Navi35 --->Port=7 <> BaudRate=57600

    W
    Witson W2-D721 --->Port=2 <> BaudRate=9600



    Z

    NoName
    CVGY-CS19 --->Port=1 <> BaudRate=4800
    CVGY-CS28 --->Port=1 <> BaudRate=4800 ή 9600

  8. #37
    Important User

    zervdim's Avatar
    Join Date
    Mar 2013
    Location
    Salonica
    Posts
    751
    Rep Power
    706

    Default Tips for sys.txt

    Spoiler: Sys.txt list:
    Spoiler: If we like to have more than one Primo software in SdCard or in Internal Memory Card

    [folders]
    has_secondary_root=0




    Spoiler: To increase or decrease car icon on map
    [map]
    3d_scale_carmodel=1
    3dcarsizemin=3000 ;high number bigger car-low number smaller car
    3dcarsizemax=5000 ;high number bigger car-low number smaller car
    3dcarsizemul=10000 ;high number bigger car-low number smaller car






    Spoiler: How to set distance for Speedwarn of a SpeedCam?

    In section TTS you might have:
    warn_distances="150:2000,140:1800,130:1500,120:1400,110:1300,100:1200,90:1100,80:1000,60:700,50:600,40:500"
    That means, if you are running with 150Km/h then speedwarn announcement from TTS will be start from 2000 meters
    If you are running 60 km/h then speedwarn announcement from TTS will be start from 700 meters.





    Spoiler: Is it nessesary to have port and baud in sys.txt?

    Answer is NO!
    And that because data.zip contain all the needed data for all devices about port and baud!
    If you like to see that you can open data.zip and go to:
    data.zip\config\devices here you will see...

    In most devices needed only this to have in sys.txt:
    [device]
    type="pearl_gtx60" ;;you must write here name of your device


    [gps]
    source="nmea"
    set_messages=0


    But there are some devices (like mio devices) which need to have set port and baud in sys.txt!
    The most common for all devices that need to have port and baud in order to Primo to have GPS signal are:
    [gps]
    port=1
    baud=4800
    source="nmea"
    set_messages=0

    or:
    [gps]
    port=2
    baud=57600
    source="nmea"
    set_messages=0







    Spoiler: To disable ding before each announcement

    [sound]
    ding=0





    Spoiler: Road Type

    [route]
    allow_unpaved=0 ;0 is disabled
    allow_highway=1 ;1 is enabled
    allow_ferry=1
    allow_charge=1
    allow_uturn=1
    allow_special=0
    allow_carpool=0





    Spoiler: disables shutdown when external power is disconnected

    [interface]
    shutdown_time=0





    Spoiler: To stop countdown timer device when you close Primo

    [interface]
    exit_on_restart=0





    Spoiler: How to mute click noise from OS when touch the touchscreen

    [sound]
    mute_os_key=1





    Spoiler: If we don't like to hear "Recalculate"

    [interface]
    recalc_voice=0





    Spoiler: If we like to have Road Numbers in Frames

    [3d_config]
    disable_roadsign_navigation_mode=0





    Spoiler: If we don't like to have Demo button in Cockpit

    [other]
    demo_enabled=0 ;if we set 1 then we will have Demo button in map





    Spoiler: Shows real earth when we push minimize button

    [debug]
    earth=1





    Spoiler: If we are using music , to have fast announcment from Primo

    [sound]
    pause_mp3_sooner=1






    Spoiler: Camera Position-Distance 10 meter from axes yy' of road

    [warning]
    speedcam_maxdistance_from_road = 10





    Spoiler: To show text loading status

    [loading]
    show_statustext=1 ; 1-Enabled(Default), 0-Disabled
    text_align=1 ; LEFT = 0, CENTER = 1, RIGHT = 2,





    Spoiler: To show text font size

    [loading]
    text_fontsize=40
    text_fontcolor=xFFFFFF ;you can set different color
    text_x=80 ;where the font be in screen in horizontial screen
    text_y=400 ;where the font be in screen in vertical screen





    Spoiler: To show loading progress Bar

    [loading]
    show_progressbar=1 ; 1-Enabled, 0-Disabled (Default)





    Spoiler: To set where to show the loading progress Bar

    [loading]
    progressbar_x=50 ;set progress bar horizontial position on screen
    progressbar_y=550 ;set progress bar vertical position on screen





    Spoiler: To show much sky

    [map]
    3d_max_tiltlevel=10000 ;increase this number to have more sky





    Spoiler: To have exit button in the main menu

    [interface]
    show_exit=1





    Spoiler: To adjust data.zip with your resolution device

    [interface]
    resolution_dir="800_480" if your device has resolution 480x272 you must write:"480_272"
    vga=0

    [rawdisplay]
    highres=0
    screen_x=800 ;if your device has resolution 480x272 you must write:480
    screen_y=480 ;if your device has resolution 480x272 you must write:272
    stretch=1
    class="landscape" ;if you are running in portrait mode then you must write: portrait






    Spoiler: To have menu extra setting in Menu Settings

    [interface]
    extra_settings=1





    Spoiler: To enable Speech Recognition if software support voice recognition

    [vr]
    disabled=0





    Spoiler: To minimize or maximize font in map

    [interface]
    mapfontscale=212 ; this is for 2D
    mapfontscale3dframed=212 ; this is for 3D in frame





    Spoiler: To minimize Primo with button like windows minimize

    show_minimize=1





    Spoiler: To see battery device in percentage

    show_battery_percent=1






    Spoiler: To skip End User License Agreement

    [debug]
    skip_eula=1






    Spoiler: To have dynamic Compresor in TTS

    [tts]
    tts_buffer=131072
    announce_exit_directions=1
    tts_logics=3
    priority="HIGH"
    always_say_road_names=3
    announce_street_name=1
    skip_exit_numbers=0

    [dynamiccompressor]
    compressor=1
    ratio=9
    gain=9






    Spoiler: To see lane arrow blink

    [navigation]
    junction_view_blink_time=1000;(0) lane arrow blinks every 1 sec
    junction_view_blink_time_no_lane=1000;(0) lane arrow blinks every 1 sec






    Spoiler: To have SmartZoom

    ;;;Settings for SmartZoom in ZNS Primo
    [camera.intersection_zoom]
    enabled=0

    [camera.roundabout]
    enabled=0

    [camera1]
    maxdistance=800
    minzoom2d=60
    maxzoom2d=240
    defaultzoom2d=120
    overview_zoom2d=3600
    minzoom=25
    maxzoom=50
    minangle=70
    maxangle=88
    defaultzoom3d=65
    defaultangle=88
    angleoffset=65
    speedzoom=1
    speedangle=1
    overview_enabled=0
    overview_distance=800
    overview_zoom3d=40
    overview_angle=80

    [camera11]
    maxdistance=800
    minzoom2d=90
    maxzoom2d=360
    defaultzoom2d=240
    overview_zoom2d=4500
    minzoom=25
    maxzoom=60
    minangle=70
    maxangle=88
    defaultzoom3d=65
    defaultangle=88
    angleoffset=43
    speedzoom=1
    speedangle=1
    overview_enabled=0
    overview_distance=800
    overview_zoom3d=40
    overview_angle=80


    [camera2]
    maxdistance=800
    minzoom2d=90
    maxzoom2d=450
    defaultzoom2d=168
    overview_zoom2d=3600
    minzoom=20
    maxzoom=45
    minangle=70
    maxangle=86
    defaultzoom3d=65
    defaultangle=82
    angleoffset=65
    speedzoom=1
    speedangle=1
    overview_enabled=1
    overview_distance=800
    overview_zoom3d=700
    overview_angle=75

    [camera21]
    maxdistance=800
    minzoom2d=108
    maxzoom2d=600
    defaultzoom2d=420
    overview_zoom2d=4500
    minzoom=25
    maxzoom=45
    minangle=70
    maxangle=82
    defaultzoom3d=70
    defaultangle=82
    angleoffset=43
    speedzoom=1
    speedangle=1
    overview_enabled=1
    overview_distance=800
    overview_zoom3d=50
    overview_angle=80

    [camera3]
    maxdistance=2000
    minzoom2d=120
    maxzoom2d=1500
    defaultzoom2d=480
    overview_zoom2d=3600
    minzoom=40
    maxzoom=140
    minangle=60
    maxangle=80
    defaultzoom3d=80
    defaultangle=80
    angleoffset=65
    speedzoom=1
    speedangle=1
    overview_enabled=1
    overview_distance=3000
    overview_zoom3d=1500
    overview_angle=80

    [camera31]
    maxdistance=2000
    minzoom2d=120
    maxzoom2d=1800
    defaultzoom2d=720
    overview_zoom2d=4500
    minzoom=40
    maxzoom=140
    minangle=60
    maxangle=80
    defaultzoom3d=90
    defaultangle=80
    angleoffset=60
    speedzoom=1
    speedangle=1
    overview_enabled=1
    overview_distance=3000
    overview_zoom3d=1500
    overview_angle=72


    Note:
    All this information are personal information, you can try if you like and see if you can fix sth in your software Primo!
    For most of these tips thanks odytsak
    Last edited by Cserrobi; 6th August 2016 at 17:07.

  9. #38
    Important User

    zervdim's Avatar
    Join Date
    Mar 2013
    Location
    Salonica
    Posts
    751
    Rep Power
    706

    Default Trouble Shoutting

    Spoiler: First Aid, when sth going wrong with software after you make changes

    After each change you made in software, if it doesn't work: Delete folder save
    You can find this folder in the root of Primo: Primo\save
    This folder keep all the latest data of software and for settings you have made!
    So keep a back up....



    Spoiler: User Interface ex.800_480, not supported or compatible skin can not found

    That means, software can not run because :
    1.Your data.zip contain a lot of Resolution ex.800_480, 480_272,320_240
    So to fix this issue you must write in sys.txt the following:

    [interface]
    show_exit=1
    extra_settings=1
    resolution_dir="800_480" ; if you have Resolution 480x272 then write:480_272
    vga=0

    [rawdisplay]
    highres=0
    screen_x=800 ; if you have Resolution 480x272 then write:480
    screen_y=480 ; if you have Resolution 480x272 then write:272
    stretch=1
    class="landscape"

    2.If software has alpine data.zip then it dosen't use ui_igo9 but ui_alpine, so you must write in sys.txt:

    [project]
    name="alpine"




    Spoiler: Software stay for long time in languages while try to run

    If you have too many speedcam files or large files(this is the most important) in path:
    Primo\content\speedcam\txt files with speedcam

    Software try to build file:speedcam.spdb
    So, if software stay for a long time, this issue caused by software to create file:speedcam.spdb
    You must wait, in order software to create this file!!!

    If you have large files then might you got Memory Problem!!!
    In this case software freeze!
    So, delete folder save, take a look to your speedcam you have add and run software again!








    Spoiler: I have got Memory issue Problem, ex: cache:4900 memory:495000

    Reason for this in WinCE:
    1.You running software with too many graphics in low memory device.
    All Primo need 32MB Ram at least up to 90MB Ram if you are using scheme-skin-TTS-Dem-building
    If you have device with 128MB Ram, then Primo will Run fine because it needs max 90MB
    If you have memory issue problem in 64MB ram device try to run only Primo 1.1 or Primo 2.0, nothing else!

    2.This issue can arise because you have in folder license and .lic files....
    If you got Memory issue try to delete all .lic license.


    3.To solve this problem try to have in sys.txt the following:
    [debug]
    max_memory=55000000
    reserve_memory=2097152





    Spoiler: I have got Fatal Error in main thread:XXXXXXX XXXXXX

    Reason for this in WinCE:
    1.You are using .exe (executable file) that not have been cracked in right way!

    2.You are using .exe file with wrong data.zip file
    Keep in mind that each .exe file contain different and a lot of important information from data.zip

    3.Sth wrong you have in folder license

    4.lua file have not been modified-created in right way




    Spoiler: TTS menu is grey, so I can't select TTS Voice

    Reason for this:
    1.You have split software, You have folder: tts_nua_v5 in Memory card and you have content and voice folder in SD Card!
    This is not recommened!!!

    2.You don't have in sys.txt the following:
    [sound]
    csv_voice_enabled=1

    3.You forgot to copy vautov5.dll in the root of Primo: Primo\vautov5.dll

    4.You don't have sth right in folder:tts_nua_v5, this folder must be in path: Primo\tts_nua_v5





    Spoiler: What is crash.txt file?

    Created only if Primo stack or restart, means have problem!
    This file , if you open it, contain important information:
    Memory, Errors, maps you are using,lua-stack problems
    If you see lua-stack, and say sth has find worng in string....that means you have add sth incompatible,
    or lua file has problem....



    Note:
    These are personal information, might I am wrong.....

  10. #39
    Important User

    zervdim's Avatar
    Join Date
    Mar 2013
    Location
    Salonica
    Posts
    751
    Rep Power
    706

    Default Software for sys.txt

    [Only registered and activated users can see links. ]

  11. #40
    Important User

    zervdim's Avatar
    Join Date
    Mar 2013
    Location
    Salonica
    Posts
    751
    Rep Power
    706

    Default

    UX Screen Capture WinCE



    Support Resolution: All


    Installation

    1.Download Screen_Capture_WinCE.
    2.Copy Screen_Capture_WinCE.zip to the path : SDcard\Software Primo\ux\copy here Screen_Capture_WinCE.zip





    Get Screen_Capture_WinCE
    This post requires you to click the "LIKE this post" button and hit F5 to read this content.
    Pass:gpspower.net



    Credit:
    To ux creator

 

 
Page 4 of 15 FirstFirst ... 2345614 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.