I also have a 1024x600 tablet and this is what I have on sys.txt
You're right, Victor - provided that the user knows what he's doing.
Many of our colleagues did not know the rules of hierarchy iGO - so it's better not to mix them.
The folder Android/data/... before android 4.4 is detected only on the internal sdcard.
And when you got the message "insert your sdcard" just force close igo if all data are in the good place.
Used samsung Grand 2 run iGO no problem....Every time run iGO need new set up voice and laung&etc... How can fix it.
The folder save is empty...
As the "New" Users have problems with this version (all in one) -
The following installation instructions step by step - simply can no longer be!
Yesterday and today I did a test installation
Phone - Xperia Z2
*The program - with my post - All in One!
Before any installation, telephone (internal memory and external) is cleared - removed all old files and folders iGO !!!
I. Installation in the phone's memory:
1. The memory is copied apk. - IGO_18.104.22.1686752_dj4b (included in the package). ( Thx djeman!)
2. In the folder Android / data - assuming a new folder called "com.nng.igoprimoisr2013march24.javaclient".
3. In this folder assume new - called "files"
4. This folder copy the entire folder and its contents iGO!
Look at the picture "internall memory"
Everything is ready - start the installation!
After its completion - I click on the "ready" and I restart the phone.
After restarting the phone I click on the iGO icon and run the program - look at the drawings:
II. Installing an SD card:
Prior to installation, you need to check the contents of folders: SAVE - remove everything and License - delete files: ACTIVATION_CODES, device.nng and server configs folder.
After you delete a file device.nng - you can copy the entire folder to a new location.
1. Create - as in points. 2 (first part) - the appropriate folders and copy them - prepared as described above - the folder "iGO".
2. In the file sys.txt making changes - that allow us to store user settings:
linked_root_list="/storage/extSDCard/iGO /storage/sdcard2/iGO /sdcard2/iGO /sdcard/external_sd/iGO /ext_card/iGO /mnt/_ExternalSD/iGO /mnt/emmc/iGO /mnt/extern_sd/iGO /mnt/external_sd/iGO /mnt/exsdcard/iGO /mnt/ext_card/iGO /mnt/ext_sd/iGO /mnt/extsd/iGO /mnt/extSdCard/iGO /mnt/sdcard/_ExternalSD/iGO /mnt/sdcard/external_sd/iGO /mnt/sdcard/ExtStorages/iGO /mnt/sdcard/extStorages/SdCard/iGO /mnt/sdcard2/iGO /storage/sdcard1/iGO /storage/sdcard0/iGO /storage/iGO /sdcard/sd/iGO /mnt/sdcard-ext/iGO /mnt/sdcard/sd/iGO /mnt/sd/iGO /mnt/sdcard/iGO /mnt/iGO /sdcard/iGO /storage/sdcard1/iGO /mnt/sdcard1/iGO /mnt/ext/SdCard/iGO /storage/ext/SdCard/iGO /storage/emulated/0/iGO"
3. At the root of internal memory to create a new folder called "Primo"
Thanks to the records of the last three lines in the [folders] - in this folder will save our settings!
4. Start the installation, and after the message "Done" - we do restart the phone.
5. After restarting, click the icon iGO - run the program!
6. The program is installed!
Screen's for SD Card Instalation:
Note: It may happen that when you first start - get this message - screen ...
Press "OK" and the program goes further.
This installation is made of such records in sys.txt:
;driver="gdi" ;for HD & QHD
;highres=1 ;for HD & QHD
;vga=1 ;for HD & QHD
I changed the trial records in sys.txt - and I made a reinstallation!
Changes were such:
driver="gdi" ;for HD & QHD
highres=1 ;for HD & QHD
vga=1 ;for HD & QHD
Received what the screen's:
III. Based on the results which showed a program ScreenSpec - I made another change as follows sys.txt file and re-installed the program:
to sys.txt write:
highres = 1
driver = SURFACE_ENGINE
screen_xy = "800_480: 1080x1776 / 1794x1080: fullscreen"
vga = 1; for HD & qHD
The result on screen's:
As you can see, each of these installations is working properly - a condition is to maintain diligence in the preparation of the installation.
If at someone is a problem with the screen - can help with program information ScrenSpec (Android Free) and enter the data from this program to sys.txt - as in example III.
Last edited by Boki_Srb; 13th December 2015 at 06:52 PM. Reason: corrected spoilers
Which TTS i can use with this version?
Thank you. I has install all voice and in android it works but in Igo i can not see the tts voice. Which voice.zip i have to use in igo content?
Last edited by pseudodeed; 19th December 2015 at 11:22 PM.