Before you launch Primo, make a calibration screen.
Or you Dimka skin.
Or use this ux-utility and add in sys.txt :
[utility]
calibratefix=1
Spoiler: link
Hi guys,
I have an Mio digiwalker P360 with I go Primo on it and about 6 months ago it started dropping satellite connections after 20-30 minutes of driving. While it was connected I could see at least 5 green lines, onces it dropped the signal, I saw at least 10 lines, 5 green ones and 5 red ones and it seemed to me that the lengths of the greens matched the lengths of the red ones, it looked strange to me. I never got the signal back, the main screen kept showing the status message as "autodetecting gps signal" or something similar. The only way I could get it working again by turning the GPS (PDA) off and then on again.
Any idea what can cause this problem?
Before you launch Primo, make a calibration screen.
Or you Dimka skin.
Or use this ux-utility and add in sys.txt :
[utility]
calibratefix=1
Spoiler: link
Last edited by costas3850; 1st May 2017 at 09:10 PM.
Are you sure screen calibration will fix GPS issue? Last I checked calibratedfix is for screen calibration. And your zippyshare went bye-bye after only 5 mins.
Do not PM me with questions. That's what a forum is for.
Costas, I forgot to mention that my Primo is a "Truck" version and that my Mio P360 has Windows CE 5.2 on it:
OS 5.2.1438 2006
Processor: ARM920T S3C2443
Memory: 53.43 MB
Does that makes any difference?
I was just looking at the file "esc.nfrun" with SLEEP "250", should I leave it on 250 or maybe I should increase it to 500?
But, you told me 3 different options:
1. make a calibration screen
2. use Dimka screen
3. use this ux-utility
about the 1st option: How do I make a calibration screen?
about the 2nd one: where can I download a Dimka screen for my P360?
about the 3rd one: I unzipped both rar or zip files the result is this:
UI_IGO9
UTILITY
UX
sys.txt
should I copy the folder UX, inside with these three folders to the Primo folder or maybe to a different folder?
and thanks for your help!
Last edited by GezaL; 2nd May 2017 at 01:11 AM.
I don't have my GPS handy (it's in the car now) but I don't recall in my Igo Primo Truck any button called "Settings", nor the calibrate the screen option. The version of my Primo is:
9.6.5.245577
Jul 6 2012
I cannot even find the way to see how many satellites are green or red when the GPS IS connected and working fine (I do remember, that I had no problem to that in Igo 8 My Way.)
I can only see the satellite info screen when I can see the revolving 3 satellites icon in the left upper corner on the main screen.
I downloaded the stuff, should I unzip anything or just put it in the Primo folder?
Btw., my Primo folder is called IGO8 because back then I couldn't make Primo work when its folder was called Primo. Is there a way to make it work in a "Primo" folder by editing any config file?
I installed the Dimka screen and now I cannot start Primo, get error message:
Failed to open file:
ui_igo9\common\ui\common_params.css
exiting application
Btw. I managed to rename the folder and exe of the application to Primo and it started and worked fine. Then I copied the Dimka files to the ux folder (I had to create the folder "ux") and copied the folder "utility" to the root of Primo and I also added the utility entry in the SYS.txt.
Next time I start Primo, get a message whether I want to start Primo with default settings and delete all custom config info, so far I picked No.
Last edited by GezaL; 3rd May 2017 at 04:06 PM.
Skin -> iGO\content\skin\
ux-utility -> iGO\ux\
First try to copy calibratefix_20.zip into iGO\ux\ folder, Without unzip it.
Add in sys.txt :
[utility]
calibratefix=1
If everythings is OK, at start you'll see for a short time calibrate screen.
Last edited by costas3850; 3rd May 2017 at 05:01 PM.
Well, I ended up messing with my Primo, that now it won't start at all. It stops in the middle of the bottom blue stripe loading. I already removed everything that I added to it, no difference.
Bookmarks