Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 3 of 8 FirstFirst 12345 ... LastLast
Results 21 to 30 of 77
  1. #21
    Garmin/GPS Systems GMod.

    Neil's Avatar
    Join Date
    Aug 2011
    Location
    Oz.
    Posts
    7,400
    Rep Power
    1434

    Default

    So you still cannot access the unit in Mass Storage Mode when you connect it to the PC? If it's still not accessable, it seems there's a problem that the cure fw can't help with. Could be hardware related, in which case probably not worth a repair charge for such an old gps anyway. Or you have a corrupted NV memory, and without an NV backup you need expert help. Maybe someone with an NV dump from another 205W could help but there needs to be changes made to it to reflect your unit's identity. You will get an offer by PM if anyone here can help with that, as it's not to be done in public.
    'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
    Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
    [Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].

  2.    Advertissements


  3. #22
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,623
    Rep Power
    5322

    Default

    Read with care what Neil wrote above and in kunix's cure thread:
    1.Flash your device with the CURE firmware Please note that the CURE firmware will never boot, it can only enter the mass storage mode.
    Cure is made to format nuvi or to delete corrupted files, after that you must reinstall original fw and files backup.
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  4. #23
    Member
    Join Date
    Feb 2012
    Location
    africa
    Posts
    25
    Rep Power
    0

    Default

    Hi Neil, I will wait and see if anyone can help me out, i can post my email address if anyone can help me privately to sort it out if it is even possible.
    i have attached pictures of what it is doing.
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    when it turns on it shows the first picture for like 8-10seconds then flashes the second picture for a split second then continues restarting doing the same thing.

  5. #24
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,623
    Rep Power
    5322

    Default

    Nobody can help you if you dont read cure's instructions.Have you formatted nuvi and flashed original firmware after cure ?
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  6. #25
    Member
    Join Date
    Feb 2012
    Location
    africa
    Posts
    25
    Rep Power
    0

    Default

    I have been researching this for about a week now. what i have done so far is
    - downloaded cure3
    - downloaded nuvi2x5W_GCDFile__760.gcd
    - opened cure3, added the nuvi2x5W_GCDFile__760.gcd file, ticked cure, match cure, update.exe
    it then updates to the gps the gps shows installing etc then it reboots and goes back into a loop.

    I cannot get the gps to go into mass storage mode to continue with the RMprepusb software.

    if i have missed some steps or miss understood something please correct me

  7. #26
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,623
    Rep Power
    5322

    Default

    unpack this in an empty sd , insert in nuvi and restart it.
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  8. #27
    Member
    Join Date
    Feb 2012
    Location
    africa
    Posts
    25
    Rep Power
    0

    Default

    Hi Neil
    i have another unit which belongs to my friend which we bought our units the same time from the same shop. perhaps you can give me some pointers on how to clone the units or how to make a NV dump from the other units to fix this units etc.
    please forgive me for all the questions i'm just looking for some expert help to point me in the right direction.

  9. #28
    Member
    Join Date
    Feb 2012
    Location
    africa
    Posts
    25
    Rep Power
    0

    Default

    ok i will try the unbrick package and let you know the results

  10. #29
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,623
    Rep Power
    5322

    Default

    Quote Originally Posted by b224 View Post
    Hi Neil
    i have another unit which belongs to my friend which we bought our units the same time from the same shop. perhaps you can give me some pointers on how to clone the units or how to make a NV dump from the other units to fix this units etc.
    please forgive me for all the questions i'm just looking for some expert help to point me in the right direction.
    We don't give infos about nuvis cloning in this forum and probably you wont have these infos in any good gps forum.
    These infos help thieves and we prefer our units stay with us
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  11. #30
    Member
    Join Date
    Feb 2012
    Location
    africa
    Posts
    25
    Rep Power
    0

    Default

    Ive tried with that unbrick package but no joy, i extracted it to an emtry sd card and rebooted but it still runs in a loop.
    Sorry i meant if there is another way to fix the unit i.e. cloning or something that is not on forums or not allowed to post publicly i can post my email address for someone to help me privately, im just looking for any method to try fix the unit.
    Im kinda new to these forums so im still learning what is allowed to be asked and not. thanks for pointing that other for me.

 

 
Page 3 of 8 FirstFirst 12345 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.