Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 4 of 4
  1. #1
    Important User Garmin unit  not recognized by pc ?
    Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    15,508
    Rep Power
    5042

    Default Garmin unit not recognized by pc ?

    Garmin unit not recognized by pc ?



    Firstly,be sure your usb cable works fine: many problems come from a bad usb cable.
    Go to the Device Manager. START/SETTINGS/CONTROL PANEL. Then double-click on SYSTEM, then HARDWARE, then DEVICE MANAGER, it allows you to view and control the hardware attached to your computer.
    Shut down your Nuvi but keep the usb cable plugged into your pc.
    Hold on your Nuvi power button untill the preboot message shows up. When you'll see the message, keep on holding the power button and connect the GPS to the USB cable
    Keep on holding the power button through this process.
    While your device is in a "Pre-Boot" mode ,your pc device manager should either show a listing for "Garmin Device" or a new found hardware wizard will appear to install "Garmin Device".
    When the Found New Hardware Wizard appears and you'r prompted how to install the necessary USB drivers ,leave the power button and put the cd that came with the Nuvi into your computer.Choose your CD-Rom drive Letter
    When the USB driver installation is complete choose "Finish" and your Nuvi should now be seen by the computer as a separate drive.

    ------------

    If the Device list shows the Garmin in USB devices as properly installed and "working properly", but you can't find the hardware anywhere to access its folders try mapping the drive:
    Click Start.
    Go to Settings and click on Control Panel .
    Click Administrative Tools, then click on Computer Management.
    Click Storage and then Disk Management
    In the Computer Management window, double-click Storage, then Disk Management.
    Click on the Garmin disk drive
    Right-click and select Change Drive Letter and Path.
    Click Edit, select a drive letter from the list
    Click OK

    ------------
    On the handhelds like the 60CSx you have to go to the Interface menu and set it as USB device before it's recognized.
    l9ebnsm
    You have to navigate to get to the good.

    Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600

  2.    Advertissements


  3. #2
    Member
    Join Date
    Apr 2010
    Location
    philippines
    Posts
    9
    Rep Power
    0

    Default

    On the handhelds like the 60CSx you have to go to the Interface menu and set it as USB device before it's recognized.[/B][/QUOTE]

    Hi, what do you mean by " interface menu" ? sorry not a techie, can you show the steps ? TIA

  4. #3
    Important User Garmin unit  not recognized by pc ?
    Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?Garmin unit  not recognized by pc ?
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    15,508
    Rep Power
    5042

    Default

    Connect your GPS to your computer, switch on your GPS and and then navigate to the page called "Main Menu" (basically just press Quit button until you reach this page), select "Setup", then select Interface. Then navigate down to "USB Mass Storage." and select that (by pressing the ENTR key)
    (Menu|Menu|Setup|Interface|USB Mass Storage)
    l9ebnsm
    You have to navigate to get to the good.

    Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600

  5. #4
    Junior Member
    Join Date
    Aug 2011
    Location
    UK
    Posts
    2
    Rep Power
    0

    Default

    Hi All,
    Had to buy a cheapo Nuvi 245, 2 PC's do not seem to recognize, also tried different cables, hubs etc tried above but still no luck, could unit be faulty, or am I missing something??

    thanks
    Mark

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •