Hi to all.
I have 3770V with 2.6 firmware and I can`t copy Region41 like I copy from my 3490 and 3790. Is there any spacial procedure for copying region41 from this 3770V?
The other strange thing is that I can`t update the software version form 2.6 to the last one, and there is no UPDATE.GCD fail in .System directory too.
Can you advise me how to copy the Region41 from my 3770V?
Last edited by bobokom; 16th January 2015 at 18:11.
I have this in update.txt:
Ok I will download the latest firmware form the link, will try with it and I will write again.
Ok Catymag,THANK YOU VERY MUCH!
I made it. It write the Region41 fail, I didn`t know that the HWID for 3770 is 1406, but in the log it is written:
nьvi blade Series Software Version 2.70, UID: 384356xxxx, HWID: 384356xxxx
Error: invalid command 'if_error'
And why there is an error in If_error?
To be executed, a text command must be enabled [i.e. present] in the unit software [firmware]. If the command "if_error" or any other one isn't present then it cannot be executed by ldr.bin and an 'invalid command' error will be shown in update.log. 'if_error' is present in US/EU firmwares of 3xxx, but there are some commands not in roughly-corresponding Asian [i think maybe SG 3760? has rrgn missing which is a far bigger concern than 'if_error'].
Older US/EU units up to and including nuvi 1xxx series also don't have 'if_error' present in their firmware. See Posts 71 to 75 here: [Only registered and activated users can see links. ].
'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
[Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].
I just enabled "Show RWFS In Mass Storage" and saw 41.bin file on the device root folder mounted on another drive on a PC. The backup was created the first time I tried rrgn,41,1:/41.bin, but I didn't know that.