From dasilvarsa post above:
15) follow exactly the same steps as above to flush to original firmware.
From dasilvarsa post above:
15) follow exactly the same steps as above to flush to original firmware.
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
Solved!!!
Thanks For all you that helped!! The Zumo is on Road Again!!
Hi Guys,
Your capabilities are very famous and now I got a friend with a Zumo 660 that he deleted all the files.
It goes until Loading Maps and turn off.
I got to put it in Mass Storage Mode following the same instructions that you gave above.
I copied all the files from another Zumo to this and deleted all the maps to try a cure, but it doesn't go ahead. It keeps turning off during Loading Maps.
Any tip to solve the problem?
Thank you!!
You do this on friends zumo?
- Format with prepusb
- add backup from your zumo 660 ( with NO img files, gpx, no gmapbmap.img )
If you do that, then remove from this non working zumo text, voice, keyboard, gpx, img and zumo will turn on.
After this run webupdater and download missing files.
In particular emove every (.img .GCD .gpx .gpi .zip .vpm .kbd) files
You have to navigate to get to the good.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
Hi Lolypop,
There are some Motorcycle Groups that we participate. I'm the one that understand a bit more about GPS, so everybody ask my help.
I installed the cure, deleted all the files that you mentioned, and installed the original firmware again, but the zumo keeps looping in the boot. If it is connected the green bar starts and fail, starting again.
I don'y know if the owner formatted to Fat32. He doesn't know as well.
The problem is that when I flash with the cure3 it goes to mass storage mode, but when i flash with original firmware it starts looping.
Bookmarks