I manage to get in USB Mass Storage, i delete the false JNX file but when i reboot the Astro 320, it gets only in USB Mass Storage, if i dont plug the usb cable the GPS shut's off.
eTrex20_30_Webupdater__290_20to30_Patched.rar (3.0 MB)
You have to navigate to get to the good.
[Only registered and activated users can see links. ] Password for my files: gpspower.net
Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.
Galaxy S5 Kitkat 4.4.2 / Nuvi1200->1250 / Nuvi3790T->34xx / Nuvi 2200 / Nuvi 66 / Oregon 600
Last week I updated a GPSmap 62S with the V4.60 and Patcher V 2.14.
Everything was fine but I detected a little issue, every time I started the GPS It was created in the menu a new Adventures Icon.
I solved the problem updating again the Firmware V 4.60 version but this time with the FirmwarePatcher213
Thanks for everything.
Barbastro, I've just checked, and patched firmware 4.60 produced with patcher 2.14 is byte-to-byte identical to one made with 2.13.
So, there most likely was some problem with your current profile, which was solved by up- and downgrade you made during the re-flashing.
OK great and thanks for your support.
That is almost an online chat.
Hello again Alex,
That is not a big deal because the problem now for my is solved.
But, I have compared both files the one created with FirmwarePatcher214 and FirmwarePatcher213 and they have six differences.
1) 0x101f=4127 to 0x101f=4127 (1 bytes)
2) 0x242df=148191 to 0x242df=148191 (1 bytes)
3) 0x2c64d=181837 to 0x2c64d=181837 (1 bytes)
4) 0x6faaf5=7318261 to 0x6faaf5=7318261 (1 bytes)
5) 0x84b25a=8696410 to 0x84b25a=8696410 (1 bytes)
6) 0x84b25f=8696415 to 0x84b25f=8696415 (1 bytes)
Maybe that is because in the V2.14 I adjust firmware version number by –50 and in V2.13 I put –1.