If there is a problem report it and we can mirror it
The map set is 168MB in size and there is 164 maps in the set. Partial areas can be loaded. Contour lines are at 50 meter intervals (Tasmania and A.C.T are at 20 meter intervals) with every 200 meters marked as a major contour. I have packaged it into an install to make it easier to install. If you have Mapsource install then the installer will add the Contours Australia to it. I have only tried these maps on my 60CS with Metro and T4Aus. So I will be interested on how they go on other GPS's. I've included a couple of pic to show you what they look like on my GPS with Metroguide. The one of Australia is from Mapsource.
What Is Contours Australia?
Contours Australia is set of transparent 5m contour maps that cover all of Australia only for the Garmin Mapping GPS. As the maps are just contour lines they are to be used with other products like City Navigator, Shonky Maps, Open Street Map or any other Australian Garmin formatted maps to turn them into topo like maps on the GPS. The mapset is just over 2GB in size and there is 668 maps in the set. Partial areas can be loaded. Contours are shown at 5 meter intervals at 120m or below on the GPS. 200m to 300m are at 10m intervals. 500m to 1.2km are at 50m intervals and 2km zoom contours are at 100m intervals when the GPS detail level is set normal. Set your GPS detail to Most and you will see the 5m contours out to the 1.2km zoom. In Mapsource/Basecamp you will see the Australian coast line, state borders and town/city points.