Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Page 6 of 11 FirstFirst ... 45678 ... LastLast
Results 51 to 60 of 110
  1. #51
    Member +
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    32
    Rep Power
    19

    Default

    Hi thanks for the input but basically all of the above I have tried. Ballebar thanks for the info re unlock it will come in handy will use it in some cases in the future.
    I seem to have 2 differences which must be do do with why I am not getting public transport.
    While all maps are present along with 3d and they work. When I go into "Navigation" I do have a"Pedestrian " mode but there is no mention of "powered by city explorer" as per the screen shot. Also i do not have a "Bicycle" option.
    When I go into a simulated trip it does not give me the option "Public transit" Although I do have bus,train, underground selected and saved. So suggestions welcome. Unlock codes are fid 800 pid 1. If I run a trip scenario it just tells me to walk the entire distance. In Transportation mode the "Public Transport" Mode is NOT enabled. So one would assume a problem with the unlock code.

    As a seperate issue how to get screensaver shots please, if I plug into computer it just goes into charger/update mode
    Last edited by wombat772; 17th April 2011 at 09:32. Reason: add comment

  2.    Advertissements


  3. #52
    Navigation software expert
    Join Date
    Mar 2011
    Location
    City
    Posts
    287
    Rep Power
    438

    Default

    Quote Originally Posted by wombat772 View Post
    So suggestions welcome.
    I had the same problem of not showing EPM until I shut down my device (long pressing the power button) then powered on to reboot and reload the maps again. You may want to give it a try.

  4. #53
    Member +
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    32
    Rep Power
    19

    Default

    yep tried that a few times no help although it did get the maps workingafter installing but not the EPM

  5. #54
    Member +
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    32
    Rep Power
    19

    Default

    Ok further to the issue with the melbourne, sydney, brisbane, adelaide maps. I downloaded Paris and New York and they worked fine in EPM Mode. On the other hand ALL the Ausralia maps come up with "Unable to Unlock maps" this actually happened the first time I downloaded but I just automatically went ahead and unlocked with FIA 2.1. So it would seem to me as a novice tha in fact these maps HAVE NOT been modified to work with FID 800. I await the input of the experts.

  6. #55
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,655
    Rep Power
    5331

    Default

    You mustnt use unlocker with CXs maps, these Australian maps are exactly modded like Paris map and other ones posted here: I've checked them all.( you can see my screens in this thread) They need just the unlock code made for FID 800. (unlocked map with FIU = no EPM features).
    Try a simple *.unl
    In your 37xx sd "Map" folder you must have only *.img and *.unl - Check if you have the right extension in *.unl.
    "unable to unlock maps" comes if you havent create your *.unl file correctly or the name is wrong of you have an invalid extension. I cant guess any other valid reason.
    To make a screenshot go to Tools/ Setting/Display/Screenshot/Enable- The button will appear in the right top corner.
    After shot it, attach your gps usb (you should have on the screen this)

    PzfDH

    browse to your nuvi and you'll find your screenshot in the "Screen " folder.
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  7. #56
    Member +
    Join Date
    Jan 2009
    Location
    Australia
    Posts
    32
    Rep Power
    19

    Default

    Hi Caty,
    Well getting there it seems I downloaded some of these maps from another thread about a week ago(now gone) and in fact they were not the corrected for 37xx so I have downloaded all the maps again and just changed the key in the existing *.unl files so now EPM mode is working. YES. BUt a funny thing happens now when I run test in simulate mode and click start it says calulating route gets to 100% then when i click transport mode and select public transport all goes well until I click start again it says (again) calculating route ---- unable to calulate route then message comes up GPS OFF. Since this is a problem post I will just slip in a quick thank you to all the respondents now as a seperate one is not allowed

  8. #57
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,655
    Rep Power
    5331

    Default

    Yes ,these map are different ,other maps posted in separate threads in Maps section arent for the use in 37xx series.
    Glad you succeeded
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  9. #58
    Member
    Join Date
    Jan 2011
    Location
    australia
    Age
    38
    Posts
    18
    Rep Power
    0

    Default

    Guys, As Catymag is aware i have spend days working on how to actually make cityxplorer work, I have suceeded , It is simple to make the maps work, but seems i still need to learn a bit more about how my 3790 works, i think its the design of sofware and what i expected is not quite what the programmers have done. So set that aside, it will work but you have to get used to the unit and you MUST spend time and know your unit.
    As for the maps, it is SO simple onces you have achieved how its all done, I have had much problems as it is NOT explained in "simple" terms, if someone actually posted step by step (see my post in this thread)
    This all you need to remember, 3790 does not need the names changed on maps EG: gmapsupp etc,
    1. Make a folder on you sd card called ...garmin make another called maps.
    2. generate a unl file with notepad and call it gmapsupp.unl....place this file in garmin folder
    3. Cityxplorer maps....DO NOT USE UNLOCKERS. the maps are unlocked, all you do is extract the Melbourne, sydney etc maps to the folder called ...maps. NO need to change map names..just extract and drag into map folder.
    Remember you can place you sd card in your reader and drap drop.
    IT WORKS!
    Place your card into garmin unit, reboot your unit, go to maps and you will see all the cityxplorer maps.
    Paris and NY are different and seems nothing needs to be done, thats why it confuses us.
    If you go to main screen on your unit, your aware the icon on top shows a picture of a car (normally) if you tap it a drop down screen comes on and YOU will see option for Car , Pedestrian and bicycle. It MUST show "powered by cityxplorer" under Pedestrian.
    So, if you have all that, you have cityxplorer.
    To test the cityxplorer, you need to pretend your in that city, so you must turn off the gps. Tools,settings,system..gps simulator must be turned off. You can try "where to" and dont forget when it asks your current loction place any point somewhere middle melbourne. What i have found is if you use the "trip planner" it sucks! When i choose from point A to end point B and press next it goes into keyboard screen??? but if you just type the end address it opens up proprerly for city navigation with bus stops etc. Its not what i thought i should do. If anyone knows whats with this please let me know.
    Also it is bullshit that train stations are not easily found, try and find Flinders streed station or any in poi under transit there is nothing.. if you do a search somehow it is found with other options of same name, this is crap.
    Maybe do simple test with cityxplorer starting from Melbourne international airport to end at crown casino using pedestrian mode and let us know.

  10. #59
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,655
    Rep Power
    5331

    Default

    Melbourne Navteq example

    Ge1oh

    All the cityxplorer maps posted here require an *.unl code made with MAPID 800 to show pedestrian mode and public transports, the cra ck is the same in every map in this thread- Paris and New York unlock works exactly in the same way than in Australian CXs.
    The instructions are in post one by pop222 , may be you havent read them-

    Code:
    Please Login or Register to see the links
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  11. #60
    Important User

    Ballebar's Avatar
    Join Date
    Jul 2009
    Location
    Off the Grid ...
    Posts
    983
    Rep Power
    968

    Default RE: cityXplorer Melbourne 2012.10 (Sensis) set-up plus testing

    Quote Originally Posted by bugger1 View Post
    ...
    ...
    This all you need to remember, 3790 does not need the names changed on maps EG: gmapsupp etc,
    1. Make a folder on you sd card called ...garmin make another called maps.
    2. generate a unl file with notepad and call it gmapsupp.unl....place this file in garmin folder
    3. Cityxplorer maps....DO NOT USE UNLOCKERS. the maps are unlocked, all you do is extract the Melbourne, sydney etc maps to the folder called ...maps. NO need to change map names..just extract and drag into map folder.
    Remember you can place you sd card in your reader and drap drop.
    IT WORKS!
    ...
    Folder "maps"???
    As described in [Only registered and activated users can see links. ] the folders to use on a memory card are "Garmin" (put "gmapsupp.unl" here) and "Map" (put extra maps and CX maps here). Don't use "maps" as a folder name if you want your Garmin unit to find any *.img files in that folder.
    All paths that the unit expects to use can be found in the "[GPS unit drive]:\Garmin\GarminDevice.xml" file.
    For nüvi 37xx it's essential to use the special versions from this thread. Otherwise it's hard to circumvent the GMA certificate authentication if you don't have bought a download directly from Garmin.



    Quote Originally Posted by bugger1 View Post
    ...
    Also it is bullshit that train stations are not easily found, try and find Flinders streed station or any in poi under transit there is nothing.. if you do a search somehow it is found with other options of same name, this is crap.
    ...
    What? Bullshit NOT easily found or bullshit easily found?
    "it is bullshit that train stations are not easily found" (here you actually say that it's easy to find station POIs)
    "try and find Flinders streed station or any in poi under transit there is nothing" (here you say that there's nothing to find)

    Using "Where To?" / "Points of Interest" / "Transit" / "Ground Transportation":
    148gqxs



    Quote Originally Posted by bugger1 View Post
    ...
    Maybe do simple test with cityxplorer starting from Melbourne international airport to end at crown casino using pedestrian mode and let us know.
    ...
    Here's an example with
    cityXplorer Melbourne 2012.10 Sensis:

    20tjztv
    Gives an initial long walking distance at the airport.
    Otherwise it connects to available public transportation hubs.
    Don't post thanking posts. Use the "Like"button instead.





    [Only registered and activated users can see links. ]

    NOTICE! Due to other activities I'm now having a very low attention to questions and requests here at GPSPower.

 

 
Page 6 of 11 FirstFirst ... 45678 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.