Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Likes Likes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Member elchaca's Avatar
    Join Date
    May 2012
    Location
    Argentina
    Posts
    13
    Rep Power
    0

    Default calibration nuvi 40

    good morning please need if any user could help me with a problem of calibrating a nuvi 40 and perform several times said calibration screen but still the same without being able to choose the letters and addresses have no way to erase and mark something brand anything if possible someone has another solution or if touch problem thank you very much sorry for the translation using google translator
    hug from Argentina
    ELCHACA

  2.    Advertissements


  3. #2
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,565
    Rep Power
    5311

    Default

    Hello
    Can you hard reset it? (I doubt but try)
    Start with the device OFF and unplugged from power.
    Touch and hold the lower right corner of the screen.
    Continue touching and holding the lower right hand corner of the screen then power the device ON.
    Release the power button when the device powers ON. You will see a new message: "Erase all user data?"
    Remove your finger from the touch screen when this message displays.
    Touch Yes.
    What happened before becoming unresponsive? Have you flashed a wrong HWID firmware?
    If you cannot hard reset I doubt you can reach preboot mode.
    Let us know.
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  4. #3
    Member elchaca's Avatar
    Join Date
    May 2012
    Location
    Argentina
    Posts
    13
    Rep Power
    0

    Default

    Catymag you commented and probe making it a hard reset, you modify the firmware with cure and the garmin express also reestablished as original factory, delete user data and anything I think is the problem of touch as to calibrate the screen responds perfectly touching points but at the end and complete the calibration switch on the device but to try to put an address letters squeezed are not indicating, that is, the touch, thanks for your answer moves and if someone comes up with another I hope suggestions option

  5. #4
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,565
    Rep Power
    5311

    Default

    Please edit and add Spanish text, English translation is bad, I cannot understand.

    What have you flashed by cure? Are you sure it was the right HWID firmware? HWID: 1350?
    Look at nuvi garmindevice.xml in Garmin folder and tell us what HWID it's written:
    Example (the red part)
    <PartNumber>006-Bxxxx-00</PartNumber>
    <SoftwareVersion>xxx</SoftwareVersion>
    <Description>nüvi xx</Description>
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  6. #5
    Member elchaca's Avatar
    Join Date
    May 2012
    Location
    Argentina
    Posts
    13
    Rep Power
    0

    Default

    Catymag no hay problema en escribir en español yo usaba el traductor de google porque me parecia que era mejor te comento desde el principio tengo un nuvi40 que dejo de funcionar en algunos sectores el tactil logre hacerle la calibracion completa en varias oportunidades sin ningun inconveniente tambien le realice cure con varios gcd ,tambien le hice un garmin express completo ,y hasta formatee el gps poniendo un backup completo de otro nuvi 40 siempre con el mismo resultado no logro que funcione el teclado como corresponde
    gracias y espero haber sido mas claro

    Catymag no problem to write in Spanish, I used google translator because I thought it was better I mention from the beginning have a nuvi40 stop working in some sectors, the touch achieve give full calibration on several occasions without any inconvenience also will cure perform several gcd, also I made a complete garmin express, and even format the gps putting a complete backup of another nuvi 40 always with the same result can not get it to work the keyboard accordingly
    Thanks and I hope I have been clearer
    Last edited by Neil; 17th October 2016 at 11:38. Reason: add EN translation.

  7. #6
    Garmin/GPS Systems GMod.

    Neil's Avatar
    Join Date
    Aug 2011
    Location
    Oz.
    Posts
    7,387
    Rep Power
    1434

    Default

    If you mean you have been able to calibrate the screen by holding upper LH corner to bring up the white calibration screen with selectable black dots but the symptoms remain, then there's a possibility is that the screen digitizer is failing. The other possibility is that the screen ribbon cable is not properly seated.

    You should be able to calibrate it because you reach the calibration screen the same way you reach preboot and as you said you've flashed cure fw clearly it's been done in preboot. If re-calibration is unsuccessful then try opening the device, then remove and re-seat the screen ribbon cable connector to the motherboard.
    'Thanking Posts' are banned. To thank someone, and/or to see hidden links and content, use the [Only registered and activated users can see links. ] button below left of the helpful post then refresh your browser [F5 key]. 'Thanking Posts' are banned.
    Please don't spam. Posts serving no purpose other than to thank or to ask about hidden links are trashed or deleted, it's GPSPower's policy. Please don't spam.
    [Only registered and activated users can see links. ] should make their first post as a new Intro Thread in [Only registered and activated users can see links. ].

  8. #7
    ☼ADMIN☼
    catymag's Avatar
    Join Date
    Nov 2007
    Location
    light side
    Posts
    23,565
    Rep Power
    5311

    Default

    I'd like you give more details on this:
    tambien le realice cure con varios gcd
    also will cure perform several gcd
    [Only registered and activated users can see links. ]
    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]
    You have to navigate to get to the good.
    Nuvi1250/Nuvi 34xx/Nuvi 2200/Nuvi 66/Oregon 600/Galaxy S5 MM 6.0.1/TomTom GO/iGO Nextgen Avic,Basar,Isr.Gift/Navigon
    Please don't flood my pm box with questions you can post on forum!! You won't hear back from me.

  9. #8
    Member elchaca's Avatar
    Join Date
    May 2012
    Location
    Argentina
    Posts
    13
    Rep Power
    0

    Default

    gracias por tu respuesta voy a intentar hacer eso yo creo que es problema del tactil y no de soft despues les cuento si tuve algun resultado positivo



    Thanks for your answer. I will try to do that. I think is the problem of soft touch, not after I tell them if I had any positive result.
    Last edited by smokefree; 17th October 2016 at 18:42. Reason: Added Google translation.

  10. #9
    Member elchaca's Avatar
    Join Date
    May 2012
    Location
    Argentina
    Posts
    13
    Rep Power
    0

    Default

    no entiendo a que te referis con mas detalle del cure


    I do not understand what do you mean 'cure more detail'
    Last edited by smokefree; 17th October 2016 at 18:36. Reason: Added Google translation

  11. #10
    Member elchaca's Avatar
    Join Date
    May 2012
    Location
    Argentina
    Posts
    13
    Rep Power
    0

    Default

    Catymag el cure se realiza a aquellos gps Garmin cuando quedan en la pantalla de inicio y no sigue el proceso de inicio para esto lo primero que hay que hacer es con un archivo GCD del mismo modelo de gps renerar un archivo rgn hay 2 formas con cure3 tildando cure te genera un rgn y con este archivo se copia dendentro de una carpeta donde hay un ejecutable updater.exe entonces se hace un preboot una vez que lo reconoce al usb el ejecutable se da ok empieza el proceso de cambiar el soft una vez concluido ese proceso se abre una ventana con todos los archivos que estan dentro del gps se reinicia una vez modificado lo de adentro y si queda en garmin la pantalla inicial se realiza el mismo proceso desde cero pero esta vez tildando el cure3 en donde dice original copiamos y reemplazamos el archivo rgn donde esta el updater.exe y realizamos el preboot y ejecutamos pide reemplazar archivo le damos que si y el garmin al reiniciarlo deberia arrancar sin inconveniente y solucionado para los usuarios inexpertos no lo recomiendo hacerlo ya que puede quedar inservible el gps una vez desconectado el usb (no me resposabilizo) el porcentaje se salvar el gps es muy poca


    Catymag the cure is made to those Garmin GPS when you are on the home screen and does not follow the startup process for this first thing to do is a GCD file of the same model of GPS renerar a file rgn there are 2 ways cure3 I heal you branding generates a rgn and dendentro copy this file in a folder where there is an executable updater.exe then an preboot is recognized once the executable is given usb ok begins the process of changing the soft once completed that process a window opens with all the files that are within the GPS restarts once changed the inside and if the initial screen goes garmin the same process is done from scratch but this time by ticking the cure3 where original is copied and rgn replace the file where is the updater.exe and do the preboot file and execute requests replace if we give garmin to restart and should start without inconvenient and solved for inexperienced users do not recommend it because it can become unusable GPS one once you disconnect the uSB (not resposabilizo me) the percentage saving the GPS is very little
    Last edited by smokefree; 17th October 2016 at 18:38. Reason: Added Google translation.

 

 
Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
This website uses cookies
We use cookies to store session information to facilitate remembering your login information, to allow you to save website preferences, to personalise content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners.