Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Aug 2015
    Location
    Andorra
    Posts
    11
    Rep Power
    0

    Default how to create IMG with some tiles of another IMG

    Hi,
    while starting with a .gmap folder one can produce easily an IMG with a subset of the initial map tiles, sometimes the .gmap is not available, just an .IMG, such as it happens with OSM derived maps.

    I do it using the following steps:
    - create an instalable set using a reg file - for that I use GMaptool + mkgmap
    - install it in Basecamp using the created reg file
    - open Basecamp an "install" the map in a (virtual) receiver; after one needs to make it visible in Basecamp (for example with javava device manager)

    Not so cumbersome, only the creation of the installable in basecamp in a bit awkward, as there is a stone in the road... the map in basecamp shows blank from far away zoom until very close (usually in the range of 50kms), no information, just empty layers, showing the rectangles that correspond to the map tiles. So one has to guess which ones to select and/or zoom in/out to select the interesting tiles. Error prone, sometimes too many selected sometimes too few.

    I wonder how this could be made easier. Wether making the top layers transparent, or adding the contents of the lower layers to the top layers, or replacing the top layers with the contents of gmapbmap.img , or finding a way to show in basecamp at the same time gmapbmap.img and the map I am working with to retain some of its tiles.

    I have asked in a number of places but it looks either there is no solution or the knowledge has been lost or is well hidden... Perhaps GPSPower.net is the only right one...

    So, anyone can help me on this? (either on the forum or via PM...)

    TIA

  2.    Advertissements


  3. #2
    Master asprin624's Avatar
    Join Date
    Aug 2009
    Location
    Belgium
    Age
    75
    Posts
    1,788
    Rep Power
    919

    Default

    This is the easiest way to make an "IMG" file.
    There are enough free TOPO maps out there.
    The example I use is France,Spain and Portugal Topo map.
    To make the "IMG" file I use Garmin MapSource

    I open MapSource load the TOPO map.
    Then pick the area I want to use.
    If I pick to much I can remove items not needed.

    See screen shot 1

    Spoiler: Pick the are you want
    oknwbur


    See screen shot 2

    Spoiler: compile the IMG to your GPS
    Xv3gh3M


    This can be done with any free TOPO map.

    The example I used is from this wabsite:

    Code:
    Please Login or Register to see the links
    I download this TOPO map

    OFM(EU2021_SW_GPS).zip 08-Apr-2021 1,9G S. France, Spain, Portugal


    Spoiler: It is a complete IMG file.

    HuI6Oik


    I then use GMapTool and cGPSmapper to un-compress the "IMG" file to be used in MapSource.

    It makes a install for your PC or Laptop.

    You will need the free version of cGPSmapper installed first.

    Then set it up in GMapTool

    Spoiler: how to setup cGPSmapper in GMapTool
    mlI2lqe


    You are all set to split the TOPO map to be install into MapSource.

    Pick the tiles you want to work with and you are done.
    No need to make a map from scratch.

    PS:

    I have already spelled this out before for you here:

    [Only registered and activated users can see links. ]
    Last edited by asprin624; 29th December 2021 at 02:34 PM.

  4. #3
    Member
    Join Date
    Aug 2015
    Location
    Andorra
    Posts
    11
    Rep Power
    0

    Default

    Thanks asprin624,
    I got ill short after my previous question and was unable to purse the thing further.
    Point is that I have different outcomes with mkgmap, so I have to try with cgpsmapper ....

    See the following images (I used for that a garmin map for Middle East and North Africa)

    What I see when installing maps from Basecamp when basecamp is using a gmap map:

    Spoiler: pic 1
    [Only registered and activated users can see links. ]


    What I sees when installing maps from Basecamp when basecamp is using a reg registered set created with Gmaptool+mkgmap

    Spoiler: pic 2
    [Only registered and activated users can see links. ]

    What I see in Basecamp using a reg registered set created with Gmaptool+mkgmap with zoom far (in this case, 70kms)

    Spoiler: pic 3
    [Only registered and activated users can see links. ]

    Next zoom level - 50 kms

    Spoiler: pic 4
    [Only registered and activated users can see links. ]


    TIA
    Last edited by Boki; 29th December 2021 at 04:53 PM. Reason: spoilers

  5. #4
    iGO Enthusiast how to create IMG with some tiles of another IMG
    how to create IMG with some tiles of another IMGhow to create IMG with some tiles of another IMGhow to create IMG with some tiles of another IMGhow to create IMG with some tiles of another IMGhow to create IMG with some tiles of another IMGhow to create IMG with some tiles of another IMGhow to create IMG with some tiles of another IMG
    Boki's Avatar
    Join Date
    Jun 2014
    Location
    Niš
    Age
    51
    Posts
    6,310
    Rep Power
    4230

    Default

    You have already started the discussion here
    [Only registered and activated users can see links. ]
    you should have continued there
    Before asking a question, know it's already discussed here and at 99.9% is not unique. Use search.
    NO ONE IS A SEER, READ (click on): [Only registered and activated users can see links. ] <- Click!
    [Only registered and activated users can see links. ] <- Click!

    Spoiler: obs
    Many questions become very arduous, a lot of time chewed deja vu...Since we have lost all the year of work and effort, many people have no will to answer the same questions again. Me neither. Use a search, please.

  6. #5
    Master asprin624's Avatar
    Join Date
    Aug 2009
    Location
    Belgium
    Age
    75
    Posts
    1,788
    Rep Power
    919

    Default

    I was just over at gpsurl and you are under caspertone2003 now.

    FireFox58 has also done explain to you too.
    So I do not understand what your problems are.

    You are still hung up on ".gmap"

    Plus you have been told you can not make it in that formate.

    PLus your zoom problems.
    Last edited by asprin624; 29th December 2021 at 06:17 PM.

 

 

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •