Likes: 
Reply With QuoteThe diagnostics page of your device (according to the screen it is a dezl 560, not a nüvi 2460) states that the battery is missing. That would suggest to me that the battery is not seen by the device. Maybe a poor contact? Disconnect the battery from the circuit board, sparingly use some contact cleaner (NOT any WD40 or such lubricating substances!) on the small battery connector and try again.
Welcome guest, is this your first visit? Click the "Create Account" button now to join.
Results 1 to 3 of 3
Thread: Nuvi 2460 red battery icon
-
27th January 2016, 11:13 AM #1Member
- Join Date
- May 2012
- Location
- Sofia,Bulgaria
- Age
- 65
- Posts
- 13
- Rep Power
- 0
Nuvi 2460 red battery icon
That happened after battery replacement.It's the same with old and new battery.It shows that battery is charging,but does not recognize it.Any opinions if someone has had this issue?
-
27th January 2016, 03:20 PM #2Important User
- Join Date
- Sep 2010
- Location
- @ home
- Age
- 44
- Posts
- 966
- Rep Power
- 731
To avoid clutter, please don't leave any "Thank You" posts but use the
button or the LIKE this post ↑ link instead
(found at the lower left hand side of any post)
To see hidden download links, use the same LIKE this post ↑ link and hit F5 on the keyboard to refresh the page.
Report broken download links by using the
button at the lower left hand corner of that post.
-
27th January 2016, 08:35 PM #3Member
- Join Date
- May 2012
- Location
- Sofia,Bulgaria
- Age
- 65
- Posts
- 13
- Rep Power
- 0
Connectors are clean and in order.I think there is something wrong with Temp1 100 degrees C,after waking it shows that unit has been off to prevent damage due to overheating.May be hardware issue with temp sensor?
It was Nuvi 2460 before flashing to Dezl,
Bookmarks