Now I check again the test map and complete Split at node of the Custom routing lines. I forgot to Split some of them, splitting CRL and the rest of lines crossing
by these lines the result is that now MPC compile with all crossing points. You can see on the two maps, original mp and compiled img. The CR lines splitted at nodes
have all crossing points, the CR lines not splitted have the fails, You see on four types of Custom Routing Lines. See
[Only registered and activated users can see links. ]
This does not happen with normal routing lines, no problema even if they are not splitted.
The problema could be easily solved again with MicroGisEditor...but with payable versión.
Did you check my _config file?
Last edited by Cnfhbr; 27th March 2014 at 07:35 PM. Reason: added a postscript
Now it Works, I do no see any fail. With your _config file I think problema is solved. Many thanks again
There is no need to split at nodes all routing lines , even those Custom routing lines.
I think I forgot one CR carácter on my _config file.
Now , next step I will try obtaining NT img, extending _types file.
Many thanks to CNFHBR for his help.
I have tested the tool mp2shp also for NT maps with MPC and performs very well , my conclusión is this is a good tool and it is necessary to manage carefully all the steps.