Hi,
From where can the China firmware of Oregon be downloaded?
Thanks,
dear all,I have got the Oregon 450 from us,the HWID:896, SW Version:4.50
and I have got the firmware of CHN Oregon 450, HWID:1276, SW Version:2.20
I have:Oregon 450 us firmware v4.5, Oregon 450 CHN firmware v2.2, the tools of updater.exe & RGN_Tool_V074, UltraEdit
I have failed repeatedly for convert.
I use RGN_TOOL & updater.exe to convert us firmware to CHN, than display system software missing...
so I use updater to us firmware,the Oregon 450 is ok.
the file : B1276000C_main.bin 31.8MB, how can I use the file. I wonder if the document related to the chinese input.
the file: B1276000C_sys.bin 11.9MB, How can I use the file
the file: checksum.txt ,content is
------------------------
Programmed Device Part Number: 541-B1276-00
Fill Ram Value: FF
Programmed NAND Checksum (for 13 MB)
Buffer Checksum is 0x7B34E100
----------------------
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
[Only registered and activated users can see links. ]
Please help me to a successful transformation, thank you very very much!
Hi,
From where can the China firmware of Oregon be downloaded?
Thanks,
I am a little late in other requests, but maybe the software missing is due to other HWID and SW Version not replaced by RGN_Tool. I have yet to work on this issue that happens for some GPS model. You can try to make a manual search and replace with a Hex Editor. RGN_Tool will likely miss one or 2 instances. I think it is in the boot.bin section, but check also fw_all.bin to be sure.
Same problem here. I am trying to convert my StreetPilot c550 to Mercedes or Mopar version. Unfortunately the SP always displays "System Software Missing":
Code:Please Login or Register to see the linksHope Turbo or someone else figure out how this could be fixed.Code:Please Login or Register to see the links
Not the HWID and SW version's problem, Garmin added another checker inside firmware.
I think the checker inside all non-english model.
I am checking TWN firmware, need a little time.
The problem is:
After run english firmware on non-english model, the non-english model will report software missing too.
Only run! not flash english firmware to non-english model!
I can convert OREGON 450&550 USA to CHN version, the newest CHN version is 2.30.
I think pureblue got factory firmware from garmin.
These filename is like as map of NAND chip.
BTW:
Thanks turboccc, I use your GIR_Editor to modify startup logo of OREGON.
Hi jinzhanhua !!!
I got a same problem in OREGON 550 US to Korean.
I used RGN_TOOL Ver 0.74... But always "software missing"
Can you convert USA to CHN firmware ??
How can you do that ? Please Let me know !!!
I have try all firmware combinations.....
If it has another checker.... it will be inside boot.bin .
How can I find Hex code ?
Bookmarks